Author Topic: Really need help with a egi problem  (Read 599 times)

Offline R_Osbo

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
  • Just joined!
    • Essex
    • View Profile
Really need help with a egi problem
« on: June 11, 2016, 01:16:34 AM »
It's a egi this a distributor but it is running coil packs as well
L1 and L2 come off the distributor that is being suvices by a leading coil pack and T1 and T2 come straight off of a set of trailing coils and go straight to the plug the car runs but starts to miss when is is warm and the longer you drive it the worse it gets but when is cold to when its get to operating temperature it runs fine could this be down to TPS
13bmspBP rx8 built with my own fair hands at Essex Rotary

Offline Skifledanabit

  • Major Contributor
  • ***
  • Posts: 1,247
  • Karma: +10/-0
    • View Profile
Re: Really need help with a egi problem
« Reply #1 on: September 02, 2016, 12:12:50 AM »
Check your oil metering pump. When the engine gets to proper operating temperature and there's an issue with the OMP, it puts the car into limp mode.

Sent from my iPhone using Tapatalk
1989 Gen 2 EGi