Author Topic: Mazdaspeed Copy wing in PZ Black  (Read 213 times)

Online mpk490p

  • Major Contributor
  • ***
  • Posts: 2,743
  • Karma: +10/-0
    • View Profile
    • http://cid-cbfddd9d1485abdb.spaces.live.com/photos/
Mazdaspeed Copy wing in PZ Black
« on: March 16, 2015, 11:43:07 AM »
Mazdaspeed copy rear wing as you can see the wing has been painted in the stock Pz Black colour.
this will not fit to the stock holes and has 4 Rivnut fixings you can use or just stick it down if you don't want to drill your spoiler
there is some slight damage where the fibreglass has split on the bottom (about 1.5" long) this wouldn't be seen when fitted and could be easily repaired
some slight bubble in the paint on the top spoiler where i guessing some water was in the paint when sprayed however not massively noticeable but would need doing if you wanted it perfect
It also only has fittings for one side, i just left them out and have replaced the blade bolts with some nice stainless cap heads
other than that it just needs a good clean!

collection (NN29) preferred but can post as buyer cost please arrange your own courier for this!

on eBay from Thursday starting at £80 but will take £80 from anyone on here




Online mpk490p

  • Major Contributor
  • ***
  • Posts: 2,743
  • Karma: +10/-0
    • View Profile
    • http://cid-cbfddd9d1485abdb.spaces.live.com/photos/
Re: Mazdaspeed Copy wing in PZ Black
« Reply #1 on: March 29, 2015, 06:32:45 PM »

Online mpk490p

  • Major Contributor
  • ***
  • Posts: 2,743
  • Karma: +10/-0
    • View Profile
    • http://cid-cbfddd9d1485abdb.spaces.live.com/photos/