Author Topic: 3rd gen 500bhp monster  (Read 1595 times)

Offline leeroberts

  • Newbie
  • *
  • Posts: 43
  • Karma: +10/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« on: July 11, 2009, 11:12:27 PM »
hi all im looking at this tomorrow and if all goes well i will buy it now i was told it had 500 bhp he had it dyno"ed today and at 0.8 bar it was putting out 365 bhp and 302ftlbs torque here is the spec does any know this car if not if the boost was upped would it be cappable of running that sort of power safely

spec
ENGINE
Overhauled engine only done 14,500km
HKS TO4S single turbine kit
HKS exhaust manifold
HKS racing waste gate
HKS triple core front mount intercooler
HKS intercooler piping kit
KOYO triple core radiator
SARD fuel regulator
Up rated fuel pump
HKS super power flow air filter TRUST radiator cap
NOLOGY plug cable
NGK Racing Spark Plug R6725-105
Aluminium pulley
Standard twin oil cooler
HKS front pipe
Aftermarket sports exhaust


SUSPENSION
OHLINES PCV coilover suspension (adjust ride height & dampening)
ARC stabilizer
Pillow ball stabilizer link
CUSCO front tower bar
CUSCO rear tower bar
Pillow ball tie rod end
ARC rear lower arm bar


DRIVETRAIN
Aftermarket Limited Slip Diff
Auto Exe power plant frame
Aftermarket twin plate clutch
Goodridge stainless mesh clutch line


CPU & CONTROLLER & METER
HKS F-con V-pro gold ECU
Blitz dual SBC boost controller
BILLION VFC variable fan controller
PIVOT air flow monitor
PIVOT air flow condition system
Defi link gauge boost-water temp- oil temp-oil press-exhaust temp


EXTERIOR
MAZDA SPEED front aero bumper
RE AMEMIYA Carbon aero bonnet
IPF twin head light system
Aftermarket sidestep
Aftermarket rear under aero
MAZDA SPEED rear spoiler
GANADOR aero mirror
RAYS VOLK Racing Challenge F-zero 18in
Aftermarket tail light
Full body repaint to Sprit R Titanium Grey Metallic (in early 2008)
MOMO RACE steering wheel
BRIDE Seat x2
SABELT 4point harness x2
Relocated battery to boot

here is the ebay link
 
http://cgi.ebay.co.uk/MAZDA-RX7-HKS-EVERYTHING-500-BHP-DRIFT-MONSTER_W0QQitemZ260442814194QQcmdZViewItemQQptZAutomobiles_UK?hash=item3ca399f6f2&_trksid=p3286.c0.m14&_trkparms=65%3A7%7C66%3A2%7C39%3A1%7C293%3A1%7C294%3A50

any help apprecited

cheers lee :D thanks

Offline Ed_RX7

  • Major Contributor
  • ***
  • Posts: 1,574
  • Karma: +20/-0
    • View Profile
3rd gen 500bhp monster
« Reply #1 on: July 12, 2009, 12:08:29 AM »
that 365 is deffo flywheel...with a to4s........you might see mid 400\'s...dought you\'ll see 500 though....unless its a bridgeport possibly......TSR...if tghats tim styles racing...they specialise in vw/audi\'s...not sure on their knowledge of rx7\'s.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Offline RobMatthews

  • Major Contributor
  • ***
  • Posts: 1,640
  • Karma: +10/-0
    • View Profile
3rd gen 500bhp monster
« Reply #2 on: July 12, 2009, 12:25:07 AM »
hmm no mention of what injectors he has running in there,i have the to4 turbo and am pretty maxed out at 1 bar on injector duty and thats with uprated seconday injectors(i have 850\'s all round)and mine is not massivly quick.pehaps im just used to it lol
To contact me robmatthews81@yahoo.co.uk

parts supplied by;

DM-Motorsport.co.uk
Pulleys, Filler Caps, Sump braces, wheel spacers, blank plates and more!...............
Info@DM-Motorsport.co.uk

Offline leeroberts

  • Newbie
  • *
  • Posts: 43
  • Karma: +10/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« Reply #3 on: July 12, 2009, 08:44:50 AM »
hi guys thanks for that. rob i was told by the original person selling it it was running 400bhp at 1.2bar now i been trying to find out what injetors its running but no luck no one knows lol. when i view the car is ther anyway of finding out on the power fc
.
oh ed the work has been carried out at lindop motorsport he just took it too tsr for a dyno

thanks again for your advice

lee

Offline skybusr34

  • Major Contributor
  • ***
  • Posts: 1,166
  • Karma: +8/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« Reply #4 on: July 12, 2009, 09:36:36 AM »
i had a to4s ith large street port. all the right fueling etc. at 1.2bar mine had 420 at the fly. tbh mate i cant see the S variant reaching the magical 500 tbh.
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

Offline Jit

  • Major Contributor
  • ***
  • Posts: 2,285
  • Karma: +22/-0
    • View Profile
3rd gen 500bhp monster
« Reply #5 on: July 12, 2009, 11:24:28 AM »
mid 400s? My t04r which is larger is barely capable of mid 400s..i was told 450 at a push at 1.2 bar and thats with a ported engine and a 4in exhaust and all the fuelling. Prob with the t04s is, after 1.4 bar its really not making much more power as you turn the boost up so i dont think youll get 400. Apparently neither will I!?

Offline Ed_RX7

  • Major Contributor
  • ***
  • Posts: 1,574
  • Karma: +20/-0
    • View Profile
3rd gen 500bhp monster
« Reply #6 on: July 12, 2009, 11:47:00 AM »
well kash made 360 rwhp on the one i supplied him...and i made that fiugure on the one i had....so at an absolute push you might see mid 400\'s.....BIG "might" though!!!!!!:Laugh
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Offline Freddy

  • Major Contributor
  • ***
  • Posts: 1,413
  • Karma: +10/-0
    • View Profile
    • http://www.Trans-Cars.co.uk
3rd gen 500bhp monster
« Reply #7 on: July 12, 2009, 11:52:18 AM »
The seller says the car will make 500 BHP at .... 1.5 bar boost - nice. Just turn the wick up!

What is the asking price?

Offline skybusr34

  • Major Contributor
  • ***
  • Posts: 1,166
  • Karma: +8/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« Reply #8 on: July 12, 2009, 12:51:51 PM »
Quote from: Jit;625380
mid 400s? My t04r which is larger is barely capable of mid 400s..i was told 450 at a push at 1.2 bar and thats with a ported engine and a 4in exhaust and all the fuelling. Prob with the t04s is, after 1.4 bar its really not making much more power as you turn the boost up so i dont think youll get 400. Apparently neither will I!?


agreed. it will be more like a hair drier at 1.4bar
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

Offline leeroberts

  • Newbie
  • *
  • Posts: 43
  • Karma: +10/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« Reply #9 on: July 12, 2009, 06:54:59 PM »
hi guys when we talking bhp are we talking at the wheels or fly wheel. i looked at the car today and coming from 380bhp flywheel evo 8 i would say it seems quicker might just be me tho i paid £8000 for it got print out for the dyno

1st run was 394bhp at 322ft at 1.0 bar
2cnd run was 386bhp at 313ft at 1.0bar
3rd run was 365bhp at 306ft at 0.8 bar mi

i was informed it was mapped by jaydee

all comments welcome :D

chers lee

Offline Ed_RX7

  • Major Contributor
  • ***
  • Posts: 1,574
  • Karma: +20/-0
    • View Profile
3rd gen 500bhp monster
« Reply #10 on: July 12, 2009, 07:14:55 PM »
if it was mapped by jaydee...what was it doing at lindop..getting dynoed?
 
well youve bought it now so as long as your happy thats all that matters......but those figures are deffo flywheel.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Offline leeroberts

  • Newbie
  • *
  • Posts: 43
  • Karma: +10/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« Reply #11 on: July 12, 2009, 07:38:08 PM »
hi ed well originally the car was mapped by jaydee the previous owner took it too lindop to get a few bits done ie comprerssion test and some other nigily bits. when he advertised it he got someone who was interested in it but didnt belive it was capable off 400bhp on a t04s turbo so thats why he had it dynoed but as you say i brought it now. so imm off to have some sideways fun :Giggle

thanks for all your comments cant wait to come to some meets

Offline Jit

  • Major Contributor
  • ***
  • Posts: 2,285
  • Karma: +22/-0
    • View Profile
3rd gen 500bhp monster
« Reply #12 on: July 12, 2009, 07:38:59 PM »
Ed - the car was originally sold by harlow jap autos so maybe thats how Jaydee mapped it. Then maybe the current owner took it to Lindop?

Offline chrisJDM

  • Major Contributor
  • ***
  • Posts: 3,242
  • Karma: +8/-0
    • View Profile
    • http://
3rd gen 500bhp monster
« Reply #13 on: July 12, 2009, 10:27:15 PM »
looks good, didnt it belong to someone else on here??? ive def seen it before

Offline Ed_RX7

  • Major Contributor
  • ***
  • Posts: 1,574
  • Karma: +20/-0
    • View Profile
3rd gen 500bhp monster
« Reply #14 on: July 12, 2009, 10:58:13 PM »
Quote from: Jit;625499
Ed - the car was originally sold by harlow jap autos so maybe thats how Jaydee mapped it. Then maybe the current owner took it to Lindop?

mAKES PERFECT SENSE NOW......nice one Jit.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of