Author Topic: WGT tomorrow?  (Read 761 times)

88GT-R

  • Guest
WGT tomorrow?
« on: July 20, 2007, 07:28:45 PM »
As title, is anyone due up there tomorrow??? I will be up there for about 10ish setting up and mapping the FC.

pete sparrow

  • Guest
WGT tomorrow?
« Reply #1 on: July 20, 2007, 07:37:26 PM »
Which way are you going up john?

88GT-R

  • Guest
WGT tomorrow?
« Reply #2 on: July 20, 2007, 07:48:03 PM »
Hi Pete,
Round Cirencister, up M5 to M6

pete sparrow

  • Guest
WGT tomorrow?
« Reply #3 on: July 20, 2007, 07:56:49 PM »
If it stops p1ssing down with rain long enough for the rivers to stop bursting their banks around hereford and some of the roads to re open i might pop up n say hi.Will give you a call in the morning.Are you still on the same number?

Offline Ian@TunerUK

  • Contributor
  • **
  • Posts: 455
  • Karma: +10/-0
    • View Profile
WGT tomorrow?
« Reply #4 on: July 20, 2007, 08:57:54 PM »
I\'m only down the road, I might pop along, pm me your number and I\'ll see if I\'m up early enough!

Offline OLSKOOLROTAR

  • Major Contributor
  • ***
  • Posts: 981
  • Karma: +10/-0
    • View Profile
    • http://www.exile-rotorsport.com
WGT tomorrow?
« Reply #5 on: July 20, 2007, 09:20:01 PM »
Quote from: 88GT-R
As title, is anyone due up there tomorrow??? I will be up there for about 10ish setting up and mapping the FC.


;) :yes :Thumbsup!

88GT-R

  • Guest
WGT tomorrow?
« Reply #6 on: July 20, 2007, 09:57:29 PM »
Hi,
Pete, still on the same number. Hope to see you tomorrow ;)

Ian, 07770514755...look foward to see you too!

Offline mpk490p

  • Major Contributor
  • ***
  • Posts: 2,749
  • Karma: +10/-0
    • View Profile
    • http://cid-cbfddd9d1485abdb.spaces.live.com/photos/
WGT tomorrow?
« Reply #7 on: July 20, 2007, 11:32:48 PM »
i know its of no relevance but i was there today, infact all day! 9 untill 5:15 and it peed it down all the way home!
Well happy with the job pip did fitting a new weber 45 on RX although it did just want to wheel spin in 2 and 3:3gears-lh

Mark

88GT-R

  • Guest
WGT tomorrow?
« Reply #8 on: July 21, 2007, 10:33:13 PM »
Did i see you there?

88GT-R

  • Guest
Things to come....?
« Reply #9 on: July 21, 2007, 10:41:21 PM »
Well an eventful day....after sorting out some timing issues we found that the wastegate was stayinging open at 0.45bar, due to a hole in the diaphram.

So, she impressed us with producing 291atw at 0.45bar......immense!! She also produced 40% more torque in the mid-range, compared to the last setup. Will wait for the new diaphram, and get her ready for TOTB next weekend.

John

Offline antnicuk

  • Major Contributor
  • ***
  • Posts: 4,102
  • Karma: +29/-0
    • View Profile
    • http://
WGT tomorrow?
« Reply #10 on: July 21, 2007, 10:57:43 PM »
Hi John,

Glad to see you found the boost problem?,   although a hole in the diaphram would make you run too much boost, surely?,   the boost used to push the valve up and open the w/g would be going through the diaphram and acting like a bleed valve?
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


88GT-R

  • Guest
WGT tomorrow?
« Reply #11 on: July 21, 2007, 11:08:02 PM »
Not necessarily.... we found that because the spring is pretty soft(0.5bar) and the hole small, it natually ran at spring pressure.

J

Offline Ian@TunerUK

  • Contributor
  • **
  • Posts: 455
  • Karma: +10/-0
    • View Profile
WGT tomorrow?
« Reply #12 on: July 21, 2007, 11:59:38 PM »
Sorry John I overslept after a long week so wasn\'t up in time come to you :(

Have to let me know when you\'re back there next!

Offline bobster

  • Contributor
  • **
  • Posts: 348
  • Karma: +17/-0
    • View Profile
    • http://
WGT tomorrow?
« Reply #13 on: July 22, 2007, 12:27:00 AM »
If the FC is still 2 tone then I saw you heading south on the M6 earlier.... I was on my way back up from Reworx.
Mines Black and dirtier than Donatos. But hey, no-one asked for a good clean fight.

Offline antnicuk

  • Major Contributor
  • ***
  • Posts: 4,102
  • Karma: +29/-0
    • View Profile
    • http://
WGT tomorrow?
« Reply #14 on: July 22, 2007, 08:17:04 AM »
:2eek glasgow to Portsmouth   now thats dedicated!  :god
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!