Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - mpk490p

Pages: 1 [2] 3 ... 147
Try bigred email them though
If not
Or your local Mazda deal just do a web search for the part numbers (makes life easier in the long run)

3rd generation RX-7's / Re: Bit more on the project (FD)
« on: May 17, 2015, 06:48:08 PM »
So while most were off at japfest having a blast I did a few more jobs on the FD
Fitted the street diffuser, had to cut the re spats to make it all work but happy with the end result!

Changed the diff oil and fitted a diff brace (what a pig!) most photos I've seen they don't have the extra bracing mine has? (Answers on a postcard, mines a RS so maybe a stock upgrade?) Anyway after a few words and a bit of cutting it all got put together just hope it doesn't need to come off in a hurry!

3rd generation RX-7's / Re: Bit more on the project (FD)
« on: May 15, 2015, 03:22:07 PM »
Talk about timing! so the engine is due to be fitted next weekend and BNR twins come up for sale! :D they should arrive just in time ;)
seen some good data for running 18-19psi making 400RWHP (US) so looking forward to getting these on..... lucky i already have the additional bits to support this (1680 secondaries, larger intercooler, 3bar map sensor) may look at water injection just to help keep things cool

Items For Sale / Re: For Sale: 99 Spec Front Bumper Re Bar
« on: May 15, 2015, 02:35:13 PM »
where in the world are you?

1st generation RX-7's / Re: KIMI 2 - Series 2 FB
« on: May 10, 2015, 06:05:35 AM »
Looks good on the surface

3rd generation RX-7's / Re: Bit more on the project (FD)
« on: March 04, 2015, 05:08:51 PM »
So managed to get a bit more done now the weather has improved!
got the Apexi IC and rad mock fitted, just need to make up some brakcets for the rad then figure how the under tray with fit! Currently the rad sits right on top of where the under tray will be so low but it can't be fitted any higher

New to MRC - introduce yourself / Re: New FB owner from northamptonshire
« on: February 12, 2015, 07:54:39 AM »
I'm local and had a few fb's in the past if you need a hand with anything ;)

3rd generation RX-7's / Re: To repair or not to repair
« on: January 20, 2015, 09:13:18 PM »
Wow looks great, always scary with such a big repair but the end result is worth it ;)

1st generation RX-7's / Re: LSD wanted for my 1985 S3
« on: January 10, 2015, 10:12:26 PM »
There was one on exile not sure if it still about

New to MRC - introduce yourself / Re: A 1st Gener from Essex
« on: January 09, 2015, 09:14:01 PM »
Hi Sarah keep it going these are rare things now! Miss mine!

MRC Forum / Re: MRC 2015 calender
« on: December 22, 2014, 06:14:48 PM »

and me cheers,

Up on the garage wall!

Ditto thanks all

Rotary and General Chit-Chat / Merry Christmas
« on: December 22, 2014, 05:50:11 PM »
It may be early but I have shopping to do!
Merry Christmas Everyone and a brappy New Year!

3rd generation RX-7's / Re: Bit more on the project (FD)
« on: December 22, 2014, 12:23:30 PM »
i only had the rear in the air mind you i don't have an engine or front bumper on so don't know if you will get away with lifting it that high with the bumper on.
was a bit of a pin on my own but i used a trolly jack to get the diff out and back in just takes a bit of patients and strength to do  ;)

3rd generation RX-7's / Re: Bit more on the project (FD)
« on: December 18, 2014, 04:02:52 PM »
So managed a bit more today
Removed the evaporator and fitted my rebuilt powdercoated calipers

Sent from my iPhone using Tapatalk

1st generation RX-7's / Re: Nice RX7 Elford Turbo for sale
« on: December 11, 2014, 11:48:52 PM »

There is no drop down on the skirts by the wheels,so i don,t think this elford has TWR side skirts.
ta stu..
same side skirts as my yellow fb had as above TWR

Pages: 1 [2] 3 ... 147