Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bin liner

Pages: [1] 2 ... 21
1
I know of a set if you are still interested...

2
Wanted Items / Re: FD Brake Calipers (Standard)
« on: October 20, 2016, 11:32:35 PM »
sorry i dont have pm function on here?

3
Wanted Items / Re: FD Brake Calipers (Standard)
« on: October 06, 2016, 10:09:12 PM »
i should have a pair.  whats your email, ill send you some pics. thanks

4
Items For Sale / Re: FD3S Plated Diff
« on: April 13, 2016, 12:09:26 AM »
I know your car mate. It was a turbo 2 plated diff in an FD Casing. The diff was brand new with new bearings so plenty of life in it. hth

5
General Technical / Re: FD3S prop shaft marking
« on: April 13, 2016, 12:07:10 AM »
wont cause you any problems....hth

6
3rd generation RX-7's / Re: BOOSTED FD BUILD.
« on: March 26, 2016, 12:00:42 AM »
sorry to hear of your woes...i know of a set of non seq turbos. i removed them for a friend who went single, i can certainly vouch they were running ok when i drove it before being removed.  If there any good to you i can ask what he wants..AFAIK he wanted 150 for them....I also know of a single turbo t04z and manifold if you want to go down that route...

7
Wanted Items / Re: Fd Gear Stick
« on: March 06, 2016, 09:31:16 PM »
If it just the stick you need,  i should have one. 14 delivered

send me your email and ill send you a pic.

thanks

8
Take the plugs out and main fuse out.  Turn over until mist clears. Leave plugs out overnight.  With main fuse out turn the car over the next day to clear any settled fuel.  Put in new plugs and put fuse back in and fire it over.  The plugs are probably knackered now so definitely change them.  Also connect up a second battery via jump leads to give you some extra oomf  when turning over...worst case add a couple of drops of atf into the plug holes and turn over then put in plugs and try and start.  That will help build a bit more compression.  Dont rev it and let it idle. it will smoke alot...hth

9
3rd generation RX-7's / Re: BOOSTED FD BUILD.
« on: February 24, 2016, 04:37:57 PM »
yes thats sounds all good.   just recheck after a few drives and heat cycles but i cant see them being a problem..

10
3rd generation RX-7's / Re: BOOSTED FD BUILD.
« on: February 24, 2016, 12:38:33 PM »
I dont think you will have a problem.  Once they are tighten down you should not get any movement anyway.  Just use the correct fastners, torque and sequence.  You have fixed bells so are not designed to move like a floating setup.  The back ring is just a centering rings....They should centre correctly off the shoulder of the fastner regardless..hth

11
3rd generation RX-7's / Re: BOOSTED FD BUILD.
« on: January 20, 2016, 10:34:03 PM »
good news...looks like your getting close to getting it on the open roads... 8)

12
3rd generation RX-7's / Re: BOOSTED FD BUILD.
« on: January 15, 2016, 08:54:00 PM »
yes mate, thats the standard one they fit on all new screens on the fd.  I have the right mirror for it.  Send me your email and ill send you pics. thanks

Car is looking great...nice effort..if you ever come to sell the light s let me know..

13
3rd generation RX-7's / Re: BOOSTED FD BUILD.
« on: January 13, 2016, 11:55:57 PM »
hi mate i should have a rear view to fit your screen. i assume yours has the metal clip on the screen? £30 delivered if you need it. thanks

14
Cars for Sale / Re: modified FD track slag
« on: November 22, 2015, 08:10:36 PM »
any contact details? or have i missed them? thanks

15
i have a stock silver type x mate.  Auto with leather, Glass sunroof, OEM side skirts.  If you want details send me your email ill send you some pics. thanks

Pages: [1] 2 ... 21