Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Ian_s

Pages: [1] 2 ... 4
1
Insuring your rotary / possible stupid question.....
« on: February 06, 2006, 08:50:22 PM »
Sounds like they are talking about the 2nd generations RX7 which was produced before the 3rd generation twin turbo.  Here is a pic:
http://www.jimmys-rx7.co.uk/Images/White%20turbo%202%20G246.jpg

2
3rd generation RX-7's / Model Report
« on: February 06, 2006, 10:42:33 AM »
Hi,
Does anyone know if there will be a model report coming out for the later model FD\'s?

Thanks

Ian

3
General Technical / Solid engine mounts
« on: November 15, 2004, 09:26:02 PM »
I put some solid engine mounts in my old 106 GTi and it was absolutely unbearable due the vibrations running from the engine running through the car.  Almost shook my teeth out.

4
General Technical / Speedo and Odometer
« on: July 20, 2004, 12:23:41 PM »
Alright mate,
I bought the unit for the car from this company:
http://www.protech-uk.co.uk/speedo_con_delimit.htm
So they should be able to answer any questions you have.

cheers

Ian

p.s. alarm manual should be in the post today.

5
General Technical / Silicone Hoses
« on: April 22, 2004, 05:50:06 PM »
haven\'t fitted them yet, but my car is going to reworx next thursday so I may ask them to fit some of the kit then while they are sorting out my 2nd turbo problems.

6
3rd generation RX-7's / Starter Motor...?
« on: April 19, 2004, 03:52:24 PM »
Hi,
Could anybody tell me if the third gen starter motor uses a negative or a positive feed?

Thanks

Ian

7
3rd generation RX-7's / Pics of my \'92 RX-7...
« on: April 04, 2004, 10:10:25 PM »
No, Carl Hayward did the rebuild.  I wouldnt trust myself doing that, though I try and do most of the other little things myself if I have the time.

8
3rd generation RX-7's / Pics of my \'92 RX-7...
« on: April 04, 2004, 07:36:13 PM »
Thought I would post a few pics of my 7.  Bought it last summer with a blown engine and in not great condition and have been slowly restoring back to good health.  Recently had a blow over done on the exterior so its looking great, just need a nice set of wheels as the stock ones are looking a bit tatty.  I have also fitted Rotary Extreme toelinks and trailing arms and silicone hoses are being fitted this week.  Im also about to order the Mazdaspeed drilled disk as my current ones are going to need replacing very soon.





9
3rd generation RX-7's / wahre and how mutch
« on: March 28, 2004, 07:17:35 PM »
They come in white, red or black.  

http://www.japanparts.com/Pic/pic067/20-4.JPG

and you can buy them from this place....

http://www.japanparts.com

10
General Technical / Remote Central Locking
« on: March 10, 2004, 06:22:55 PM »
remote central locking is when you lock and unlock the car via a remote.

Apparently it is difficult to fit because the locking mechanism on the 3rd gen uses wires rather than rods to lock and unlock.  They also reckon that the locking mechanism on imports is different to the uk models, can anyone shed any light on this?

11
General Technical / Remote Central Locking
« on: March 10, 2004, 06:10:42 PM »
Can anybody tell me how much of a job it is to fit remote central locking to a 3rd Gen RX-7.  Im currently having problems with GAP security who as well as making a really crap job of installing the alarm, are telling me its going to cost me hundreds extra to install the remote central locking.  This is due to them having to replace the whole system or something despite the fact that remote central locking is supposed to be part of what I payed for in the first place?

12
General Technical / Silicone Hoses
« on: February 13, 2004, 03:33:44 PM »
For those that are interested it cost me $163 dollars for the kit including shippingand they only accept payment through Western Union.  So once I had payed the fee for that the full cost came to around £100.

13
General Technical / Silicone Hoses
« on: February 09, 2004, 02:48:32 PM »
Still waiting for a reply on total cost, will post here when I get it.

14
General Technical / Getting spare keys?
« on: February 08, 2004, 11:55:13 PM »
A key cutting/shoe repair shop in town.

15
General Technical / Silicone Hoses
« on: February 08, 2004, 01:06:22 PM »
$118

Pages: [1] 2 ... 4