Topics

1

Rotary and General Chit-Chat / URGENT.... Contact for DANDAN or anyone south east who does vinyl!!

« on: January 07, 2013, 11:50:13 AM »

Hi guys....
Has anyone got a contact for an old member called DANDAN.... he used to be in the vinyl trade..... or another company down Reading way who could wrap an RX8? I\'ve just been given a rush job that needs to be done by Wednesday!! Unfortunately I\'m a little tied up with my own work so trying to pass on some business or it\'s gonna be an all nighter for me not including the traveling!!!

2

Rotary and General Chit-Chat / Uprated rad

« on: November 28, 2012, 07:13:31 PM »

Has anyone got one??
I know this isn\'t the correct place to ask, but very few people look in the wanted section compaired to the rest of the forum! LOL

Cheers
Jono

3

Cars for Sale / 2006 Seat Leon TDi

« on: November 28, 2012, 06:52:52 PM »

Navy Blue (rare colour according to our local dealer), Very good reliable car, never let me down in the 4 years of ownership and will be sorry to see it go. Car is very clean through out, the only mark I have noticed is a small ding on the tailgate from a Tesco car park. Cam belt has been done this week. The private reg is not with the car..... Just waiting for new reg & documents to be issued by DVLA. If there is anything else you would like to know, please contact me and I\'ll reply as soon as I can!
The only reason for selling is due to moving abroad! Contact Rhian on: 01646 690123

General car info:
1896 cc Diesel, Manual. 2 Former Keeper, Full Service History, 11 months Mot, 17" Alloys, Climate Control, i pod connector, ABS, Cruise control, Folding rear seats, Lumbar support, Immobiliser, Passenger airbag, Side airbags, Radio/CD, Rear headrests, Traction control, Body coloured bumpers, Heated door mirrors, Front electric windows, Drivers airbag, Steering wheel reach adjustment, Cloth seat trim, Remote central locking, Isofix child seat anchor points, Rear wiper, PAS, Steering wheel rake adjustment, Rear electric windows, Trip computer, Alarm, Front fog
lights, Service indicator, Electric door mirrors, Height adjustable drivers & passengers seat, 3x3 point rear seat belts, Audio remote control. Insurance Group:6



















Cheers
Jono

4

Wanted Items / Alloy Rad

« on: November 27, 2012, 08:39:58 AM »

Has anyone got an ebay special cheepy they are replacing or left from a car being broken?
Wanting an ebay one as I\'ll probably need to mod it and don\'t want to butcher an branded rad (unless its cheep)
Might even be tempted by one with a pin hole as I got some stuff that will repair it

Cheers
Jono

5

Wanted Items / 2 1/4" coil springs

« on: July 25, 2012, 10:45:30 PM »

Hi guys, has anyone got a set of coil springs that are 2 1/4 ID 8" in length and over 600lb spring rate??

Jono

6

Rotary and General Chit-Chat / Help.... any suggestions welcome!!

« on: July 15, 2012, 10:52:36 PM »

Right, unfortunatly this is bit of a grumble with a person who used to be highly active on here (not going to mention any names as things always take a turn for the worse and thread gets closed down!)

Basicaly the guy in quiestion wanted a shell a friend was selling (4 years ago) so I bought a rolling shell (that had an engine in), and draged it accross the south of wales, and east along the M4 for him.... the deal was, I bought the car and he would use the 600 payed as a deposit for building the engine (I\'d pay the difference on collection)

Now 4 years on, I managed to get the engine deliverd to Era so the rebuild is underway, but parts were missing from the engine (some of which have turned up with Era and some not ) but now I\'m short of cash and trying to get hold of the person in question who has been messing me around for so long..... and it\'s proving impossible!! I know he works away for long periods of time training etc. but I\'m starting to get a little :censored::censored::censored::censored:ed off now to say the least, as the engine is getting close to compleation, but need to find the money to pay the remaining bill!!

Can anyone sujest anything, as I think I have been more than resonable!!??

Regards
Jono

7

Wanted Items / oil cooler

« on: June 08, 2012, 12:34:22 PM »

Looking for an oil cooler, basicaly it can be a nakerd one as it\'s only going on the drift truck as a dumby (as the active cooler is in the drivers headlight and want to match the passenger side!)
So as a result, I don\'t want to spend much.... could even be a section of nakerd rad core for what I want!

Anyone got anything?

Jono

8

Wanted Items / Good front rotor and housing

« on: May 06, 2012, 09:09:45 AM »

On the look out for a good front rotor and housing if anyone has got some??
what sort of coin you after?

Jono

9

Rotary and General Chit-Chat / Loosing interest in motoring & don\'t know why :(

« on: March 24, 2012, 02:03:17 AM »

Is it just me or are other people suffering the same as me??
The last 12 months all my motoring passion has been sucked out of me (possibly due to the MR2!!) but my pride in my cars has totaly gone the RX hasn\'t realy been looked at for 12 months.... quick wash and that\'s it, not clay bared, polished and waxed like I used to, the MR2 hasn\'t actualy been washed in over 12 months let alone seen any polishing.

Think I need to get my priorities sorted, finish the house, then get the Rex up and ready to use for the summer I think..... hopefuly with my new "Oldone racing" rebuilt engine, then finish the Hilux and get rid of the dirty homo MR2 that\'s sucking my passion dry!!

Jono

10

Rotary and General Chit-Chat / suspention spring dimentions....

« on: September 17, 2011, 07:46:51 PM »

Guys, have any of you got a set of springs you could measure up for us please??
I\'m trying to find a set of springs that I can fit to my drift XJ6, but can\'t stretch to uprated Jag parts, as they want your wallet & your bum hole as payment

the important diamimesion is the spring width, which is 120mm for the front and 140 for the rear..... std uprated jag springs are about 220lb, but they would be a bit soft for drift, so if the RX ones are the right size and if anyone has got some silly stiff springs they want shot of..... let me know

Cheers
Jono

11

Rotary and General Chit-Chat / after some coil overs!!

« on: September 12, 2011, 11:59:55 AM »

Hi guys, I\'m trying to get my hands on a second hand set of coil overs for my drift truck!! Has anyone got any coilovers they have changed (for better brand or through damage) that they want shot of?
basicaly I am going to be making custom suspension arms for the truck so I could use prety much anything as I\'ll have to make new mounts and brackets etc.

If anyone could help me out, that would be ace,

Cheers
Jono

12

Rotary and General Chit-Chat / Anyone live near Elton, Peterborough..... would you be willing to help??

« on: July 08, 2011, 12:55:40 PM »

Like the title says, if you live near Elton, Peterborough and able to help me that would be ace!!

Basicaly I have bought an inlet manifold and carb for a V8 through ebay (but final purchase was private and not ebay) since then I\'ve been trying to get the guy to pack and weigh the manifold so I can arange for collection, but he hasn\'t done so and it\'s been 3 weeks!! Aparently its sat on the shelf in his garage, but hasn\'t had time to sort it out for me.... so would someone be willing to pop around and pick it up for me, and then I can deal with a reliable person to pack it ready for collection!!
Hope someone can help out as I\'m getting a little worried that I\'ve been taken for a fool, but then it could be the fact that he let it go for less than half what it\'s worth and trying to fob me off to resell?!

Cheers in advance
Jono

13

General Technical / oil pressure doing odd things!!

« on: July 01, 2011, 09:54:38 PM »

Right, I only noticed this the other day..... oil pressure has dropped a little, she has had a recent oil change (so could be the oil used as mineral isn\'t available anymore )
But anyway.... when I\'m driving along the oil pressure on my Apexi gauge is sat at 2.5 bar, but when I lift off the throttle it raises to 3 bar!!

Any ideas? I know the oil pressure sensor was in an accident and was damaged, so not sure how accurate it is now..... but anyway even if it is reading incorrect, it would still show any fluctuations in pressure!!

Jono

14

General Technical / Water Injection question?

« on: May 05, 2011, 09:37:51 AM »

I know this is probably going to be an obvious answer, but I just want to clarify things!!

Basicaly I am fitting water injection to a 2.0 Turbo Vauxhall 8v engine.... the engine is running 250cc injectors and by the net calculations to get the 10% W/F ratio mix I should be looking at pumping in 100cc/min in to the engine..... now here is the thing, I\'m going to be going pre turbo with the water so does this change the jet size?? also the jet I\'ve got is a 50cc/min unit, so what would the afect be running this.... would it just be I\'m not getting as good a result as I could???

Jono

15

3rd generation RX-7's / Braided Fuel lines....

« on: April 11, 2011, 11:22:30 PM »

Where is the best place to get some stainless braided hose for the fuel lines and what should I get, as on the bay there is a choice of Teflon or nitril hose?? Also what size... 6 or 8mm??

Cheers
Jono