Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - exiled-viking

Pages: [1] 2 ... 4
so Missed my RX~8 gear knob in my new Mx~5 so bought some billet ally block and set to it this is pic heavy will be fitting it to the car tomorrow so more pic's then I have gone for green illuminated gear knob this time to match my gauges got all the bits off `eBay for less than £10.00 there's 40 hours work so far but should only take another 2 hours I have to make some rubber seals well I made them but they take 10 hours to set....... this is totally built not bought  ;)

so a few more pics of the fitting and wiring tomorrow thank you for taking the time to look  #-o could be fitted to most cars  :13:

Items For Sale / TONYS ITEMS FOR SALE RX~8 parts
« on: January 09, 2019, 01:37:30 PM »
Well the sale of my Car is going a head .... a number of people have made offers but as some of you might know I got a fair bit of other stuff that I would like to sell off so here's a taster of what could be on offer from tomorrow depending on what the new owner he might want the extra stuff and an agreed job lot will advertise it on this clubs forum 48 hours before I put it up on FB pages Or RX8OC sites but here's a taster...

I will not be selling this sort of stuff for silly money but as i said most of the stuff is brand new so keep your eyes peeled you might get a January bargain

RX-8's / got the bugger back on the road
« on: January 05, 2019, 06:37:10 PM »

Got the bugger fixed back on the Road  :violent1:  go go juice in more go go juice after a good run tomorrow.....getting 4 points to each litre  8)  8) ZoomZoom ... fixed the problem with her MAF sealing ring perished new one made thank god for super glue ..... cut an new rubber seal that was to big the glued the ends together I will get a New one monday from my parts guy....  and a bugger'd spark plug   ??? ???

thanks for taking the time to look

Cars for Sale / Mazda RX 8 for sale. Update
« on: January 03, 2019, 10:45:10 AM »

So the time has come I am selling the 8
its a runner but The engine will need a rebuild it’s going as is so until I get what I want then it will sit in the garage the supercharger and HKS ECU HKS Camp II are worth £5k all day long the Car bespoke Leather work interior Is worth a round 3k it would cost you more than £8 k to have it done all the other bits wheels tyres another 2k the list goes on
so what do it want for this sick puppy we’ll offer over 6k
so there you have it I will not part out you buy it you can part it out but don’t post up I would like this or that part

RX-8's / She's Back On the Road not completely done but good enough
« on: December 13, 2018, 08:05:00 PM »

yep got the rear end 90% done and she's back on the road :13:

hoping for a good day Sunday for a good blast ............

posted here as well to catch as many members/none members a guests .......

Tony Titch Black Exiled-Viking hi all some of you might be aware of this recall the link is a the bottom of the page .......
3 hrs ·
Warranty Recall dose your car Need it.....
Check another vehicle
Fuel type
Date registered
31 March 2006
MOT valid until
25 February 2018
Get an MOT reminderwhen the vehicle's MOT is near its time for renewal. (Opens in a new Window) by email or text.
If you think the MOT expiry date or any of the vehicle details are wrong, contact DVSA.
Open All
MOT History
Mileage recorded at test, parts failed or had minor problems
Outstanding vehicle recalls
Check if MAZDA RX8 has outstanding safety recall
Outstanding recall found
As of 3 February 2018 there's an outstanding manufacturer's safety recall on MAZDA RX8 T200CAD.
Contact a MAZDA dealership to arrange for repairs. so called MAZDA they told me fuel pump/Retain Ring seal had to laugh Told the parts guy look at my purchase history HO he says you did it this with the up grade kit 18 months a go .... give me the warranty one and i sell it on Ebay i said don't think we can do that....well you know i bought that new rear bumper well knock me some cash of that then I see what i can do call back monday he says .....just love it .....
If you've had the recalled component repaired recently, it can take up to three weeks for the manufacturer to update their records.
Was this vehicle recall information useful to you? Tell us your views so we can improve the service.not
Not selling just found I got a recall for fuel pump seal 😂😂😂 I only upgraded the hole system 18 months ago so Just going to phone in to get the recall stricken off 😂 LOL
If you need to check the Recall Warranty on your MAZDA in the UK click on the link below...

        :13:              ... 1419024717        :13: contact your Mazda dealer

Rotary and General Chit-Chat / Bugger think my clutch is on the way out
« on: August 16, 2017, 11:22:47 PM »
well see if i can do an adjustment in the morning had the beast out to day putting the power down when she's was up to temp there was built up in engine speed but the power to the wheels was bit lagging so think I done the clutch plate Ho bugger thats another £260.. to clive MRP for a new one I get the front end done first then book a bay at Bespoke and fit the clutch later it should get me to london ok ..... :sign0085: :sign0085: :sign0085:

Hey You Guys If your At the same Event As me ( maybe not this year but soon) Or In the Rugby Area then I just bought One of these Mines in Orange

You would be welcome to use it........!!!

This is for the UK spec and will do all Rotary engines from the manufactures .....

Rotary and General Chit-Chat / Black Rubber Friday
« on: November 26, 2016, 09:31:52 PM »
My black Rubber Friday......!!!

 Black Rubber Friday On the way to having my winter service 8 miles out got this Puncture on the right rear @ around 75MPH...!! But around 20 seconds before the puncture I got a warning from my TPMS so I was already slowing down to pull over to take a look.. even with the tire totally deflated it still let me drive to the service garage at 30mph so no tow truck needed just love the steel walled radials there not for every one but stopped the tire from shredding and taking out the wheel arch,... also slow deflation so no wheel Rim damage and still let me drive to my Destination, two new rear tyres on now and the winter underbelly of the car serviced as well as an oil change well pleased.....the 98 mile run home was faultless lol

very impressed with this TPMS Unit that I have fitted

waiting over at bespoke performance for the new shoes

engine oil & filter change when i can find it.....!

Underbelly ready for the winter   ;)

well a few weeks ago I was out with Amanda and when I got back to the car the Rear  lower Grills I had hand made had been stolen I have waited a few weeks to see if they had popped up on E.bay or any other sites.. for sale, they are a one off so if seen on and Rx8 or site for sale could you let me know they where only held in by two screws the next one,s if i do them again will be bolted on ;)

thanks tony.c

Rotary and General Chit-Chat / Membership
« on: January 26, 2016, 04:57:56 PM »
woo checked membership found I had run out so just paid for another year  ;)

Rotary and General Chit-Chat / Any one going to the next weekend
« on: November 07, 2015, 07:06:17 PM »
 :s_hi: anyone going to this event next weekend I am off to see it Sunday to get some bits, will post some pic,s of things of interest  if you like  ;)

NEC Classic Motor Show

Rotary and General Chit-Chat / well what to do
« on: October 07, 2015, 10:33:58 PM »
well got the go ahead to buy my new mx5 for next year but then my ever understanding partner Amanda says well you can do a RX~7 project but your not to spend more than 40K decisions decisions !!!

Rotary and General Chit-Chat / TODAYS QUICK PIC
« on: September 24, 2015, 10:24:37 PM »

Rotary and General Chit-Chat / such a shame
« on: June 26, 2015, 07:35:29 PM »
bad day

Pages: [1] 2 ... 4