Mazda Rotary Club

Cars by Model Type => Old school Mazda's => Topic started by: Furb on January 07, 2013, 09:36:08 AM

Title: RE-Furb.nl RX-4 project
Post by: Furb on January 07, 2013, 09:36:08 AM
Teaser...

(http://sphotos-h.ak.fbcdn.net/hphotos-ak-snc7/p480x480/481307_579968378696381_209043398_n.jpg)
(http://sphotos-d.ak.fbcdn.net/hphotos-ak-snc7/p480x480/388181_580532745306611_1115244_n.jpg)

More info soon...
Title: RE-Furb.nl RX-4 project
Post by: fil_auto on January 07, 2013, 03:26:38 PM
Cool, that looks interesting :)
Title: RE-Furb.nl RX-4 project
Post by: mpk490p on January 07, 2013, 03:32:26 PM
Nice, a lot of engineering gone into that ;) little BP?
Title: RE-Furb.nl RX-4 project
Post by: Furb on January 08, 2013, 07:15:28 AM
Indeed..

Half bridge with smooth idle and low-speed driveability, low mileage, yet still producing well over 200rwhp
Title: RE-Furb.nl RX-4 project
Post by: Brett on January 08, 2013, 07:29:56 AM
Some great work there :)

Looking forwards to seeing and hearing more! :)
Title: RE-Furb.nl RX-4 project
Post by: Furb on January 23, 2013, 09:33:14 PM
Had some serious setbacks, found out the body wasn\'t rocksolid like i thought..
The left siderail (dont know the exact English name) turned out completely rotted after prying away some underbody coating.
But that doesnt matter for the total project, it just affects the timeframe in which it wad all planned.

As for the engine, it will be built from my S5 TII engine that came out of the car i have owned for almost 8years. I was running it with a BNR stage4 turbo, pushing out somewhere around 400hp.
The engine was rebuilt over 10years ago and still running pretty strong with about 6bar compression

Defined Autoworks has calculated some port specs for me and will complete that with a matching header. They will be cutting custom porting templates for me.
primary ports--- Intake Open- 14 degrees ATDC / Intake Closed - 65 degrees ABDC
Secondary ports--- Intake Open 110 degrees BTDC/ Intake Closed- 65 degrees ABDC
Exhaust will be their race port configuration.

The intake will be a custom built heated inlet manifold that hold dual Weber 28/36DCD carbs.
Long small diameter primary runners for low-end torque, short large secondary runners for high-end hp
the primary and secondary are not connected to eachother, so the huge amount of overlal of the bridge will not affect idle quality and low-speed driveability.
Redline will be at 8500, because of the pretty basic build and everything is calculated to this spec. Higher redline is useless on a streetcar anyway

suspension will be a full gsl-se swap so it sits a little lower, have better brakes and a slip diff.
Also more choice in wheels with the different PCD.

Pics will come shortly, gathered a lot of parts over the last few months...
Title: RE-Furb.nl RX-4 project
Post by: clive on January 24, 2013, 12:35:33 PM
Sorry to hear the 929 wasn\'t as good as it looked :(, but excellent to hear of that super reliable Rotary thats brought you over here to see us again and again :chat

Keep us updated and I will see you at Rotarystock if your there
Title: RE-Furb.nl RX-4 project
Post by: Furb on January 24, 2013, 04:11:57 PM
Well, its not too bad considering it is a 38year old car ;)

Besides the siderails and some other small spots, the body is pretty well preserved.
It has however been fixed in the 90\'s, they welded in new rear quarters which was done right.
But the rails were patched with some pieces, which is never a good idea really...

Got lots to do, i will be re-wiring the entire car aswell..
Have had too many electrical gremlins in the FC, i never want to run into stuff like that again!
Title: RE-Furb.nl RX-4 project
Post by: Speedworks on January 24, 2013, 08:11:29 PM
Furb, love the project, but just my 2 cents here.. after having ported several plates and engines, my opion on porting has changed quite a bit. If I would have to do it al over again, I would leave the primary ports alone (for low end torque and general driveability) at most a little opening up on the closing side. (and a bi of polishing in the runners.

Same thing for the secondary ports but maybe a bit more opening up on the closing side.

People may disagree with that, but in my opinion it\'s more than enoguh when you plan on using the car for the occassional drive around the church, meeting and highway pull against an ignorant Porsche :p. Except if you are draging with a huge turbo and only use the car for that, I would recommend more extreme porting.
Title: RE-Furb.nl RX-4 project
Post by: Furb on January 25, 2013, 06:35:46 AM
I already thought of that, because my initial chats with defined were about a Bridgeport secondary only.
They provided me with a matching primary in case i need it.

when i started thinking about  my N/A setup, driveability was my main concern.
I had lost that a bit in the FC, so i know what not to do..

Coming from 400hp, i already knew i was not going to settle for 150rwhp
I set myself a goal of somewhere around 200rwhp, but with low speed driveability.
I did that only after i had found out about the rotary engineering DCD setup, which allows you to drive like stock in the low revs and still have the 200rwhp potential.
Low speed driving should also have about the same mileage as my 929 had from the fsctory, possibly even better.

According to defined, with port specs provided i should obtain anywhere from 210-240rwhp, depending on the tune and accuracy of the calculations for the manifold and header.
With a stock primary 200 should be within reach.

At first They tried to offer me their circuit SPEC streetport, but that would lower my torque too much so i didnt agree to that. It would have 230rwhp potential with those specs.
The new specs would offer about as much no, but lots more torque.
Title: RE-Furb.nl RX-4 project
Post by: Furb on May 06, 2013, 09:15:39 AM
time for a long awaited update...
 
i havent showed you guys much yet, but this is a summary of the last few months
i
 had a RA OMP adpater on my FC, but with the use of a different front cover it didnt fit anymore
also wanted to use the 4 port OMP of the S4 N/A, for premixing in the carbs and use the stock FC oil plugs on the housings.
so i built my own adapter to make it all fit
(http://www.re-furb.nl/forumpics/01.jpg)
(http://www.re-furb.nl/forumpics/02.jpg)
(http://www.re-furb.nl/forumpics/03.jpg)
 
the FD alt used to sit on the side in my Fc but with the use of the 12A front cover it didnt fit anymore.
made a new one and flipped the alt for easier tensioning
(http://www.re-furb.nl/forumpics/04.jpg)
(http://www.re-furb.nl/forumpics/05.jpg)
 
with al the different gearing i will have, the speedo will be way off, so i needed to something about it.
also needed some new gauges and wanted them in stock location.
i replaced them all with a full Smith\'s Cobra series with programmable digital speedo
(http://www.re-furb.nl/forumpics/06.jpg)
(http://www.re-furb.nl/forumpics/07.jpg)
 
made some injector plugs
(http://www.re-furb.nl/forumpics/08.jpg)
 
had to modify the FC shifter housing to make it to fit in the 4 chassis
(http://www.re-furb.nl/forumpics/09.jpg)
(http://www.re-furb.nl/forumpics/10.jpg)
 
plug for the speedo cable
(http://www.re-furb.nl/forumpics/11.jpg)
 
heavy duty throttle linkages
(http://www.re-furb.nl/forumpics/12.jpg)
(http://www.re-furb.nl/forumpics/13.jpg)
(http://www.re-furb.nl/forumpics/14.jpg)
 
calculated and fabricated a throttle pulley
(http://www.re-furb.nl/forumpics/15.jpg)
 
view of the engine with the engine bracket, alternator and 2stroke oil tank
(http://www.re-furb.nl/forumpics/16.jpg)
 
time to remove the old
(http://www.re-furb.nl/forumpics/17.jpg)
(http://www.re-furb.nl/forumpics/18.jpg)
 
mounted the engine subframe
(http://www.re-furb.nl/forumpics/19.jpg)
 
in with the new
(http://www.re-furb.nl/forumpics/20.jpg)
(http://www.re-furb.nl/forumpics/21.jpg)
 
shifter location is right on the money
(http://www.re-furb.nl/forumpics/22.jpg)
 
this is where its at right now, lots more coming..  ;)
Title: RE-Furb.nl RX-4 project
Post by: clive on May 06, 2013, 09:34:14 AM
Huge amount of work but going forward, well done and keep the updates coming

How is the Gen 2
Title: RE-Furb.nl RX-4 project
Post by: Furb on May 06, 2013, 10:00:23 AM
I guess you havent read my old thread got a while, but the FC had been parted out more then six months ago.

The engine that is going into the 929, is the FC engine.
Title: RE-Furb.nl RX-4 project
Post by: clive on May 06, 2013, 10:20:47 AM
No missed it, good to see that you kept its heart to live on in another though :Thumbsup!
Title: RE-Furb.nl RX-4 project
Post by: re japi on May 07, 2013, 04:40:43 AM
Looking very nice. :)
Title: RE-Furb.nl RX-4 project
Post by: Furb on January 08, 2014, 09:58:56 AM
before:

(https://wm6miw.bay.livefilestore.com/y2pVB3odUoYbGrD2yCG4_a33VpEJhDvKYg3hq_crYf_nwXRooySIk6zA48L9EH2e86m0asykW6I_UFbuvjDic_M1cl4y7LOVZejC9I8CbWX3Wc/P1060351+%24Small%24.JPG)
(https://wm6miw.bay.livefilestore.com/y2pSyWg7mOW5JfK6cbIIBzTTCv56ZMdNJ50NxworvXEYYbPFa2ZYioXlV41hAX4SNgLvgJBdc-lwnBKwRhp3t1xxA-Ub9pj3NikC50ILok20sg/P1060354%20(Small).JPG?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pQfkNghDfHmVt4PALTBNi2XEItf_cuKd6eLrj0HP7Me_Ew03WC3W-nSTC9YveMLiQCVBQIazgNJWmEC_zhyCY29Gfppr3BuQbGu1pi5snZU4/P1060355%20(Small).JPG?psid=1)
(https://wm6miw.bay.livefilestore.com/y2p7mN9pvn-M4bpitRiHHRQWgjMIJMJNpmcARNedVCVeqrPHAopam6E0OL9XKwGSg8Hw2DbYbVQew3zVkTJ2WhW0I-jU4Z1_VC2kCeHQR6YPJ0/IMAG0039%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pqi1g-KoCx_kJEhTmTbyDleSWBqY_538dWppQUmr5hapV399N8vA5YJ49wPZijB7HY2QgRX0xIoKarGot4Xg3rHuqE7qRFtHd3_rJoxiqAjI/P1060361%20(Small).JPG?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pE9ZjX4iWbTKr8FKxOGCZKxvXd5NLAvSmo_4R4IQKsI-yLlBMmnSELtwPXvsjJLJnzPwmCZwOgGZLAyg8Q2uVSBEfGKEa9-fHEnQgGR-mvtc/IMAG0027%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2prOmSSsg6lSXQlI_0B6S0zzIHdg-JVwYUGGgwkOV5ZXeUWan-kddb-Pcn1ZLgbtRgvVXsXlnwH8msG8oLXm427xYnaR38x5b1wcEpQlvTD7E/IMAG0028%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pdUSbAVHeq_VZ4PYTJvYaSP1P8pk8ctVKwc9MFlK52QmXmgpm5FI9hk-D_stWDKvGeFDUy9rfBrqFhnPqjEPwEdUo-h2bfvcUB5yBLzU76xo/IMAG0003%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2peKSnWAmt3rqzns-OtCzkBgxRx05jp56vc1EKtvXHCo0KRBa0uAds3TOdUgE3lc5WslKr9LqNoygsfqDfkeMgAMxru_RCEnmk1h6vrTwymOw/IMAG0041%20(Small).jpg?psid=1)

after:

(https://wm6miw.bay.livefilestore.com/y2pBk-KoHDP34qyV4N92gG97IL3wPhbb219DQTt4XTsn5FF2TjLfddM3LTKOhU4juWex3Zk2ONk09gveCe6nvPz4wYqoeRzozwThI5MwN3YYrI/IMAG0063%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pwyNM-kUuiTEIMGreVs-hl4xhM7FX2WcB1glyoBq-HJ72cuF0zV0Q87fyKoE08icJZcFrumhbh2hgMmoMO6OrSOYc-286USIt6IASfprfqUM/IMAG0065%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pRuirnJxkF9YJjYHsDuw1XBY3fNEsb_lDZRx8fGO6ZgxNffiAkMq0v8JFokpwZMr9HlB6f8zV_QuVrJqjfUfzmZTM7S1Kl-8DusG_DAg7ud0/IMAG0066%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pjJmJbT-DTtjmaQ7nIMP16ty5YRn9qq1sgXGoDj8dlknjoKQWsneTAJWnEpmRx7_BQkx3-KYPGtBVq1qZPIcgCP9w2uJk6Z5sGEZp2IeeyCs/IMAG0067%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2p3KWS2iA_MDwJDQYF10n7iF5DgoZCmFaZuK35ymEf9NYcAB4GhC-vRnOjZh1SVeT5qhR35ms04Mj0bzt0hitXtc9CLBarmIc_V5BxJGiG9yI/IMAG0068%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pe8zLEDYxoFKp1fKIoerZjf4g6PMmMjaBXU_hNXDK0u3lKvCcHx-Wk9fsfbTMeT5XfHyiHUMYslg6LrrAuurITlS9Ue8CNtNKt1YBe2R6AsY/IMAG0069%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pXSTDW1oo8EmEjfnmQKFrZBiVbdq9_X0ey049xDlSIlIXa1erjV1cbDOxeiOFqj-NzYuGBoVYifK6dFxB3u_fzZg6jxv1n5noRppiILWRVvc/IMAG0070%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pnfXjKVojevmb183NjBRBD5fUoXxQZuPSi2PAu0noymiJ2ROAAzfTfBlgkmwKoD7OUCdw2z_ccACM4WM1eSmWcTtUVukM6Fu5WaFoRIIhFAc/IMAG0071%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2puvy-E6yjMeLEPNa-WE5DlyrqWChxDXyX-fkmw_gLnudij6TsAZ0h0mcT-jNqAOFLdmNevI_0rx2yWupiCTSbKomu-JSkzW292G_zVL014pY/IMAG0072%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pzNysyUu4mPv2eCvNx2HxV6Uj0nxxlemO00nOBsaJjG8p1yQYqGYvMMmlpLNXYFH59ASb9yP0yQGVMokoaKCMifdQZIhlqh1daX4nEDQS4-o/IMAG0075%20(Small).jpg?psid=1)
(https://wm6miw.bay.livefilestore.com/y2pfMoAlmTCEqN_EcgCwONIYgFIiOFuMXPEeP9c96RaweCO9lsZ488N2hTvzDirtciWZHICW3ytKb-mfuaA9KbDBgRbF651MKFpcJrov9s_Kwc/IMAG0076%20(Small).jpg?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: Furb on January 08, 2014, 09:59:41 AM
just kidding.. not the same car ;)

but the second one is the one i will be finishing instead of restoring my old one
Title: RE-Furb.nl RX-4 project
Post by: steve garbutt on January 08, 2014, 10:38:01 AM
Gonna be nice to see another quality oldschool Rotary back on the road :)
Title: RE-Furb.nl RX-4 project
Post by: Ricco_04 on January 11, 2014, 09:14:16 AM
I fell for it, got to the after photos and thought flipping hell!
Title: RE-Furb.nl RX-4 project
Post by: Furb on March 20, 2014, 11:28:25 AM
been too busy with work , but finally got some work done!

started with the puzzle, so the painter could pick it up
(https://wm6miw.by3301.livefilestore.com/y2pQf5Js7DD9-xjjlKjsw_Gc00s1oL8AgAGXZX3BTc4G31x_NN4TlncwpCAEQGwwmcda6u8aia-_xZm19Y5x8p2FyTWZkvpPX4Btzco56v5k1k/4.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2puEZLniZLMkVBSGWcnqO-Qd_sF5NJyYxZJk0VVlP0Kk89L5w2TRl_8TYtUcO1bG3YQj9gQe2Wad5P2f8Bmv6EhSLLQ5CAA2dNVu0k55LCcHk/5.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2pt88hbwA5x5RZo6f_EYeZtJ7HjzpvMVVoxz_I0pHdOCmKvFJm6vHyvZTv6d1CxyCOH9deWvpm0vJhsYIdDaOFd3iLWJhrN2Tt98RaDc54Xa8/6.jpg?psid=1)

work in progress
(https://wm6miw.by3302.livefilestore.com/y2pRv3DpdPZxV_Gpm2fSpHNBhqOik0WVHeUlBlNN5Az1HpTnTeuZofaYjJ6M3AlDq8Knbaq0h-Aq6uFj5FwWnFNe0-aGqJ2XciBZGS9IOMH_ao/1.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pKMN3w_rDx_BkxBEiEq_-BzeEUNUBO_ZO5Yu66iKcaXBcaxIWOw47IzqYd0Afjai_zet9DeLuOSJghGNjCABXNo-EP9HROo-rHhlOLEpCsbI/2.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2p117iNP8DHS0As2DYf3s8wNLnB-0H0TYb0EKBGNLaladVwVcw6POENaJFqC65L5InDF2cfn_mBAmq9CLwLC3MdRzCDuggPLxxdg4zGe6rWeI/3.jpg?psid=1)


got hold of some awesome JDM goodness: SSR longchamps XR-4 wheels (for the RX-4, what\'s in a name ;))

front 15x7,5 ET5
(https://wm6miw.by3302.livefilestore.com/y2pkvElXwjiynBY7cOjWL9O3MYQiQXKkThIp42VvxsI4NTpNPpuotMxJlTy5j-yWR2MoU5vYE0fjYBLCRRrCjSvU13rzw2BhitbbjZsVAVVt9Q/wheel6.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2pT6HE68V2dmTTuBc78EmQy0uodH6RzMk7fexmsqn03iT8NTbVWzWsZ74CTuB_KXLuCSd72xPh1-ZF-zgUstLPyYEcyrIMj5aOazl-kwLZ_M0/wheel5.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pL7PIRyOWz_2Hx_kcMtR4DtufWrGkEIDj8dJOY-m-zztUVZQ511SaF7CtdCeAeNHnaZqVa2n4WBHFLghznt_c8a7gwoCOksfhZhadLySO_WI/wheel3.jpg?psid=1)

rear 15x7,5 ET-7
(https://wm6miw.by3301.livefilestore.com/y2pyaQy_CL9KDKvCohwQ-YCB2mKCLGNyP3Gxh6aLlmwEZXF3MZxTrKvMXZLg1is88NPIN--wZcw9kSdJN88JNFOeqA4O8gg_NxxBFwGmw-572k/wheel2.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2p73nvupBkjg-FU4qkcmsOLjEASQ4yWDEtpC5fn9g1PdC6Yx_2qCccMVZ0LonQg1ufJLOkF7OzVx9B2eKXK17z8wwxa-bOAqBSwTgqcWSz4QA/wheel1.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2pGNLTaxcEq0paikY9W1ZWiRLS-vpt8nzJvSH7u8wznkw53o7qZzlaYrkPp5QfWa0e8UKSFkwud_bHV8mhJyu0DUNDzm1o7xNqD8ctdPLEMwg/wheel4.jpg?psid=1)


rear wheels won\'t fit, but i have to modify the rear axle anyway, so i will be narrowing it 7mm on each side so it will fit perfect!

to be continued ;)
Title: RE-Furb.nl RX-4 project
Post by: Furb on April 08, 2014, 11:36:17 AM
more progress

(https://wm6miw.by3302.livefilestore.com/y2pfh12Mw_8V7yc4UtVPS2KdCS-NrpUH-__7jQX8vfKGJ-Jffht4sjEkEzT9DGKIHn0FqJ6dRrD7bxr0sCZynumwRUOGqw1idNTu0a5JMaoi1k/IMG_108397534687209.jpeg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2pTFQ-tZ66dAvX1cEVFJVPygs4KW90E-clZZqx7IWsAaf1HWlcukQ3vmTW6ZZTHRLKyeUmrTdWVsVS4Tmc-CbXoYEf7dLAD-NOUfjKXtpJQRw/IMG_221727935286206.jpeg?psid=1)

scored some NOS centercaps in Japan for my wheels
(https://wm6miw.bay.livefilestore.com/y2pAbfCXizReLiXc6v_V6WhHjaU2yR8-vjwrDAx1sv51JQ9OKgJLHdZMwB-MC-vjoiLHwJHhHQTyDDD3D9kBtrc7YavUda_rAiq6PybyKyCEl8/ygptx575-img600x450-1396245124k7z4fv24524.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pwX_lIJtDUS5w04GVutzxPEf9HuE0VbIUzV-tmsxQPdUftxREP8_MyfgiCMXf0rBUOI3eea2TE7S84vj4gTeq2Ldejy2A8CUjfoKYFlcuVlE/ygptx575-img600x450-1396245124oyhaxw24524.jpg?psid=1)

got some small amount of spare time that i spent on my dash unit.
i had done this before, but since i have a LHD car now, i had to do it all over.
but this time even a better version, because i kept the stock circuitboard intact so it will make it a lot easier to connect it to the stock wiring loom later on!
(https://wm6miw.bay.livefilestore.com/y2pI2GBTl_9oyNTWvHz5QN4uJWzHAQAYCIjlppLGXGQeTUFzNNRTHgNkzXWoiJsP9iUWlyU3--8V3G8blMIP2cKogQhWd9H5RfNn5pcIr9JVIA/IMAG0079.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2pe3TfhcZ5eC4iu-VEUb50lzTp4nsuHa6C7kYaLJjs2oJ39HNNk22F28dy_Exv3-KtZ4Sepfy6MiW0pmilUyOwuk3tuLvsZeHCr7B64DlOwhg/IMAG0078.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2pcu3ECOv-CakzE8hbsfMuDhLuJMMH4BgTpVIrf0m-7O_ii6-trdMvTZgNIfaHt7BVIzIlrhXVK8H_EvmVqrQ8ijXdDG8xoW0XjosGh1uEg_Q/IMAG0076%20%282%29.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2prIV1cZAAUh0CmsFHr7N3w9TUJI72PhKEEU2dhyF1Ixh9-tep00A-t_dNSsmLR34JhUfOTeznfKXojlaU2LsqtRHpE2i9llOePNrN6JeWBBA/IMAG0075%20%282%29.jpg?psid=1)
(https://wm6miw.by3301.livefilestore.com/y2poMdwo56CTyzWFYCAGvQp2K5UWXQu9pGDJOHehIiT1fKELLRh3-UOPU7dwOUWItbDbtwKmn8vjAhSIBhHWig452015vijGJJeTmbKBYIy8iY/IMAG0074%20%282%29.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pDTu5VJEbASXK5WysRiABE9sLdPJPnW4uJA7MzVVFbzk2tIKErAa3zO_KOrwyUiE5IODZAkmR7BrmjUULap657u4MUFBpp_4vjetSCUROwe8/IMAG0073%20%282%29.jpg?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: steve garbutt on April 08, 2014, 11:48:55 AM
i have the roof center plastic console for an rx4 if your needing one :)
Title: RE-Furb.nl RX-4 project
Post by: Furb on April 08, 2014, 11:56:42 PM
Already got that ;)
Came with the car, already restored.
Even the map-light has been re-chromed
Title: RE-Furb.nl RX-4 project
Post by: Furb on May 24, 2014, 07:23:19 AM
Received my SSR XR-4 longchamps from Japan :mrgreen:

(https://scontent-b-ams.xx.fbcdn.net/hphotos-prn2/t1.0-9/10299015_884951354864747_2809340695197670975_n.jpg)
Title: RE-Furb.nl RX-4 project
Post by: clive on May 24, 2014, 08:57:18 AM
Most excellent wheels, these will work really well :Thumbs-up

Did you sort the offset problem, if not why not strip the wheels and have the 7mm machined off the back, so much less work than axle narrowing
Title: RE-Furb.nl RX-4 project
Post by: Furb on May 24, 2014, 10:44:43 PM
Need to transfer the rx-7 brakes onto the 929 axle, so i need to cut and weld.anyway...
Just going to cut off 7mm extra and be done with it
Title: RE-Furb.nl RX-4 project
Post by: mexx on May 27, 2014, 07:36:32 PM
very very nice Furb ;)
Title: RE-Furb.nl RX-4 project
Post by: Furb on May 28, 2014, 07:23:10 AM
Thnx mate!
Title: RE-Furb.nl RX-4 project
Post by: Furb on June 09, 2014, 09:57:25 PM
went to visit the paintshop today to check on the progress

progress is slow due to other work, and also the epoxy coating has made it a bit difficult.
the previous owner had put on somekind of boat coating which is very hard and takes a lot more time to sand. also had troubles with the filler, reacting with the coating.
it took some time to find the right materials and mixtures to make it all stick and stay on like it should.

slow but steady we are getting there.... :)

(https://wm6miw.by3302.livefilestore.com/y2poviEPSBeLUzX8zeYxbEgSs2STGnL3xt2Z-dEuX2_6myN2ogw6TGViGMT-jP9QCZGFMV_TnZgMKFX2diNUXW23nNMSE-JPk7ttQhiflb6MMU/DSC00710%20%28Large%29.JPG?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pYK_WypX3byIE5X0cimQ_10tXQ1aysX6ciAlQp-MlrQ-pueFgDoEEqZ6rqbkSSKPN9-cRc3HJuTxp8Fft30aGCsjxC7NxnuJduN0RrWVjGLM/DSC00711%20%28Large%29.JPG?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2piJOROBmiNHdHdlWarZL6rf59gxSSY6Al4bUkooRQ7Gp6ImK06WdCY4hz8hWfZ0AOVY80Luglvn3ynTMJB4b2xFvHkMTYL28tZ0MTG5k9cfI/DSC00712%20%28Large%29.JPG?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pEFKHAsX24namAvHqtYt15qK_TTMdoqLKQFnTk8CpDpKXoRcSMvRccGaNeRmU0OHOWIcy8Y6uHSfnPmVBeiJLll1QDtOxTfO6xpoFqtjYFso/DSC00713%20%28Large%29.JPG?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pDQU925zLBpeP6wKOLQX2V-GPJv11DYQNoJNtQDN9HpvBIpdw6NTX4f7fBwCSFkhca-YY6DCZkgSQd0eoHqMGt_HkH6ff5tsWPlGMHMaA_ks/DSC00714%20%28Large%29.JPG?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: re japi on June 10, 2014, 05:55:50 AM
So pretty, looks great :)
Title: RE-Furb.nl RX-4 project
Post by: mexx on June 10, 2014, 06:15:46 AM
looking good Furb me like very much :Thumbsup!
Title: RE-Furb.nl RX-4 project
Post by: RobMatthews on June 29, 2014, 11:49:12 AM
Any Updates?
Title: RE-Furb.nl RX-4 project
Post by: Furb on June 29, 2014, 09:36:16 PM
Not really..
bodywork has stalled a bit, cause it\'s a bit too hot and humid to do the bodywork.
The filler has hardened before it\'s on the car, and he is not willing to compromise by using different compound. Quality is key, even if that means it will take longer...

I do have my workshop ready now and started some prep work on the suspension
Title: RE-Furb.nl RX-4 project
Post by: mexx on July 26, 2014, 08:49:49 PM
keep it up Furb :chat
Title: RE-Furb.nl RX-4 project
Post by: Furb on September 27, 2014, 10:34:47 PM
finally some decent progress!

car is fully sanded and straight, ready for the basecoat!
(https://wm6miw.by3302.livefilestore.com/y2p3B--2TMqXEIAp87rkG_BBEd5147JtWg7gfG9R28jiaQKpXyky3pNCQOo3MYfliz4wyWG-PGBTdu621m4uHllL_9Hj4O6iM36GxG_WceUMGc/IMG_10555392633042.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pXD6LZ3qXLW01h2uJGFjonyc24wwgvk3y6GhAKV1MrF8rnCnTD5det2Jdxd0xwkkSH_7PXFtvfF9S3iscT1q7ZjOgTbq1rytL9DmpkElkLfY/IMG_10557312181339.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pA01rfnkaVNWuxUHLOmymHM7yEnsztQoKyve34T6q-ZUH0wBf5kHJp-L0ekRVxLmDAPMNm3kGERQLrJEMCZOIt9ftWO41oJSGWoqA_kYpUpo/IMG_10561068933972.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pviOOZ_TVQQEmjvchsupxhGmbiZ7QV5rTcezB3p4tphpb1gbc0TkKi1iBp7orI24G81PE_YpvSEZ5tgZY0e3e4SbeKeymnlsdP-xs191mCe4/IMG_100244682672289.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pFwSZMgtHf1FRyIIhOiIThfd03jDMBCsBhP0-5E5ehTPTrOhON4e_hTiJOlMe3Ll3I5yz7nevy8L-nIhY4yAkX1bAhrKNPDLJqcCetymbjwE/IMG_100249365413018.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pHRjmy1dNkJqhgFN_AWWMC7eVTzfOvwUDKFroFX-azozbgDxQ3m709ZW2bnFuwnJYK-h06Jhuw-9KG35FRmyYr6ZfUNkRyJaqqBdV0dFFJQE/IMG_100247019617200.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2p1MOgZSQW6-bM8WsV4o0z7R25ZaUmz9_shsdcglL3K6rMDe05vOzLbh0CtIFTZyJmb270doFhGajInqGwmzJu-nJwbMWD_PjonvM5OMr1-t8/IMG_106833996146492.jpeg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2ptlQ5pLSI7Xrl3VPD7O99Z6XDhGkpzQ5GPDPFLtzls6vUY0Pk49hOWZcqF68P79ZOkTK2ZhMPlWVy5Jm0sZ8cuwiWGHs73bwhCyJpG0wuUXo/IMG_100240322318253.jpeg?psid=1)


meanwhile i\'ve been busy preparing stuff
assembled the front struts with Tokico Blue shocks and T3 camberplates
(https://wm6miw.by3302.livefilestore.com/y2pVWWawiflf6h-mQYsTdKkg2YC5_x2N49qYdY0dCMLOPWaHp45aRABL61V3x_Y2arybqLvoQ0lKuVxMRePEHVBOxiVTqz2hHw99xYtpBXyFws/IMAG0144.jpg?psid=1)

made a tophat to support the weight of the car instead of the spherical bearing of the camberplate
(https://wm6miw.by3302.livefilestore.com/y2p724sU20XwrZo7HGd_13u40ldw7f2lFJ-M5Cg0nUJO90J3j7rFQH0_Jbg6BGqT3a2xnvnYR3w74tLdrbiy_vS4eFNw8Q2ql8t_jJXkqKLm1A/IMAG0151.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2pYKkt4-x3w7JGtZpQ079dkbrxfb2KjQMOj_MkwrAYD-32rB-wuW_MqIMAKwA7xds6oXFvAwJtF3ZDuRYsjz9jP50Orejsq14tNXToCCt-P_w/IMAG0152.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2p-OOvZCdstcWWp1Xyels79EooU3u1T2KEIDHxNp5eT7vFTpMtllMUXLOvkHLkMCASM-yyqIhIp1cpXy8xgcIsV7SaGL749CuB-TSftXOdK04/IMAG0148.jpg?psid=1)

made some roll-center adjusters, to compensate for the lowering
(https://wm6miw.by3302.livefilestore.com/y2p1s7OaLSVfuQcpbpnPycIRZCKr3uKthwwyLQ8frBu4rTwKemHMd44EVoUnE8c8VHVrQ5maZp90sZwcwS8ZnnvR607f-yi3YDbVCyNjRekEUs/IMAG0158.jpg?psid=1)

prepping the engine! not rebuilt yet, engine is fine at the moment so that\'s less troubleshooting later on
(https://wm6miw.by3302.livefilestore.com/y2p3T9NwqAdkIn9zkufWdwlfnbjRvy9vKzrNlO9mnZt9zT0A3GcQZfLDJZeymAvf-Yy4E-OWM-fNRnpGQ1RNeJcSUcsPU8SF2pCEatTCttcu5U/IMG_20140927_212304.jpg?psid=1)
(https://wm6miw.by3302.livefilestore.com/y2p9ZSsFz_ro-yXuRm1jhAzQnSYwrSDDI3WHMRaZk4yJStRTzb0K2WwDPcbup6_CadfwXFIvjIckCfGs2-ILvlk2FMD1BWBCuH7qkWAjfjoARo/IMG_20140927_212315.jpg?psid=1)

mounted the MSD blaster coils for the direct fire system
https://wm6miw.by3302.livefilestore.com/y2pXOva-eMviU2uODKm9h14D5W8kqvFKK9l6sfsk7zeCxg9jTHGgosvhD7WNEroD4DsipM2Dt0jAYgRVAw18ygGMw4wfCpMWsp_f9v54enAE4A/IMG_20140927_212333.jpg?psid=1
(https://wm6miw.by3302.livefilestore.com/y2pXOva-eMviU2uODKm9h14D5W8kqvFKK9l6sfsk7zeCxg9jTHGgosvhD7WNEroD4DsipM2Dt0jAYgRVAw18ygGMw4wfCpMWsp_f9v54enAE4A/IMG_20140927_212333.jpg?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: Hobbawobba on September 28, 2014, 01:21:43 AM
Thats looking really nice aye! Been following this quietly for a while now haha. What makes you go with the tophat over the piece you got from T3? Is the standard bit weak or something? I don\'t know too much about this stuff :p
Title: RE-Furb.nl RX-4 project
Post by: Furb on September 28, 2014, 09:13:40 AM
Modified the T3 tophats because they were no good imo.
They were too high, which preloads the spring a lot, and they are not centered so can wiggle around too much
I ordered them just for the bearing, i was lazy to find out what type it was :)
Title: RE-Furb.nl RX-4 project
Post by: re japi on September 28, 2014, 05:30:34 PM
That is soooooo beautiful :) Good job
Title: RE-Furb.nl RX-4 project
Post by: Furb on October 31, 2014, 10:46:19 AM
Some more prep-work

Modified the stock Speedo cable drive for an electronic pickup.
Calculated 2900 pulses per kilometer
(https://icxqug.bl3302.livefilestore.com/y2pakV7WbOC2J4lBwSryjNxEubH6F1Uho9su5ySazMIQiIQqEVfDk-obnZ9SRWJ2AfJnguABvzs0LZ4EwtzZSvCAzMABRBepbSRmwrw-6iFw2g/10613060_984492378243977_1722540323095441343_n.jpg?psid=1)

Wired the entire gauges unit to work with the stock harness so it\'s plug and play!
Also modified the loom for extra sensors.
Even the illumination works with the stock dimmer switch.
Powered it up on a battery and calibrated the Speedo with my puls/km value.
(https://wm6miw.bl3302.livefilestore.com/y2pW_acypSPl2M4hkw_r1b0sATdVMdxFGTb-PqOQWY_5hCqIFSfllYRKbxo1oegpWuS13TfN5vMPfkyLrUsNqvmS8-EUcxJPuUxRLmnooEKl44/10420064_984364811590067_5754444787143361684_n.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pdCnnh-SKubyGGD1MKgofYy4WVdKfInhUWjMJLzsSIzRo3-NFpTsXzKKK-BJ77RgLA6KNaaI0WNki5BTdd2faj45Y33nwHiBKLnz2d9R7xzE/10731186_984364881590060_2525497930744714884_n.jpg?psid=1)

Measured and drawn my own flanges for the intake manifold, cut on a waterjet.
Tip: drawn as a single flange and cutting them is cheaper ;)
(https://wm6miw.bl3302.livefilestore.com/y2p9JYJEFt9pjEq00-BRXD2x8DVP0HpXxps90bLilssP2HPNOMVJfpNsQuQbisBjRrXy6rMNthmnsYlJF8_EPvVPl7DKyfjRnyC7l4dPuKj324/IMAG0030.jpg?psid=1)

Started mockup and measurements for the intake manifold.
Intake runner length calculated according to port timing.
The only thing I had to guess was the angle of the engine in the car, I hope it\'s pretty close cause the runner lengths are spot on at the moment.
(https://wm6miw.bl3302.livefilestore.com/y2p6NbSIo64hNUALHWNvT0rTejEEwc7TAl-tG2ehRMIscTC--D-HpkoTt4zhyIZlC1U0_3HpberKtuVRcHJdoJeEN40qo1s718_UAWgkbh5hxo/IMAG0059.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pQBSFXJ1ePbOIkaVAVUA_ndQ0dB6rjW81z-26qfCzG1EzLpH4PBaJm5CS3HBCa47ya2VXvXmbIXsztYyZZLyjpoUnyKpb80oWX5op3P1PWL0/IMAG0061.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2prQuRhMwGpaduN5tzvltWjh6Fh_cV4cgZYXqnaCvOFEOviqk0GMr0vO725T97hWjlzEEHSqI0_KziP67cwgsCUDYJIKASv9XirnJh4029pSU/IMAG0062.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pA2zJ2a-8p_yNtD2jqSh7w9nvqNp75BVxZiCSUMbnu_Aq_So2Yt4HKLBiX8y_tuJ2TtndMx7fwPtpuJ4O8UKmVKrb9iyYGeO3naNGT6UHawI/IMAG0064.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pb-2DsuqRcs27fdxlVinG0oKSlSUjExqJHd-SIJ8179wqSgfchmvzWgbmCL950WWhJi_qPffd0R5kup8Tk1-_rNeLJ-bw3I6ZlbkfmBQso3c/IMAG0063.jpg?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: re japi on October 31, 2014, 02:12:39 PM
That is SOOOO beautiful!!! :) What carbs are you using? I have been thinking double carbs too but I cant get no info how to setup them. And someone said that its almost impossible to tune in rotary...
Title: RE-Furb.nl RX-4 project
Post by: Furb on October 31, 2014, 02:33:18 PM
Thnx!

Nothing is impossible... Just takes time (and money)
I don\'t know a lot about carb tuning yet, but I will take my time ;)

These are Weber DCD 28/36 carbs, they were used in the 70\'s by Rotary Engineering and sold as a kit with manifold for both 12a and 13b.
People who have had these, say it is the best in the world for a street setup.
Ideal for half bridge

Because they are so rare I decided not to wait for one to come up for sale, but build my own.
Title: RE-Furb.nl RX-4 project
Post by: bdarepat on November 01, 2014, 11:11:28 AM
I am in awe of your skill and meticulous work. :god

Needless to say then that I am enjoying your project build thread immensely!:Thumbs-up
Title: RE-Furb.nl RX-4 project
Post by: Furb on November 01, 2014, 05:19:30 PM
Thnx! Always nice to hear people appreciate my work :)
Title: RE-Furb.nl RX-4 project
Post by: re japi on November 04, 2014, 11:06:40 AM
Just realized that I cant buy 929 Ht project to made a RX-4 clone. Because my work would look like S**T compared to awesome work that Furb does ;)
Title: RE-Furb.nl RX-4 project
Post by: Furb on November 04, 2014, 11:22:35 AM
If you build your personal dream car, who am I or anyone else to say that it looks like :censored::censored::censored::censored:...

Follow your dreams ;)
Title: RE-Furb.nl RX-4 project
Post by: Furb on November 23, 2014, 08:21:48 PM
(https://wm6miw.bl3302.livefilestore.com/y2pWesOc60SP0rhQJAMiUrR9AiUXWsZOWFxiBWvIHSGvrX9_dJ6TpubaiJ--8HbhHR53wEhNNek_CkknfUmsVhv7aF4ASHavsR08xaQq6MJfGs/IMG-20141121-WA0006.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pe9RWQYJwi3VZAN6Nt63UVXW8bzLrEu6mndmQx7xtagXpEODbBhO2S1dxhVdd3i-f1G92jop4BqepgjlkUI8RNzgxPc_blrVdgpLoCfaN6rI/IMG-20141121-WA0005.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pHV_Ra3HS1Nzsb7zWUu4K8TcWzTJtrEZYGbSqUb1Pyp5oColbvkI5KOE_099R_UeBZ0J_jpvOhmi4JeVaB5GiQkS_rQr9KNy8k-K4wSYQHSo/IMG-20141121-WA0007.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2ph0OgFv3gpWi7v2AqddM4cl9ey1gupWnO6ouK0kF6S1WFA26TU0GM-4gTuh2-noTAaYDr9lxMNDUkJAzQmdAdB17GfVVFCG5IJADDae3iEcg/IMG-20141121-WA0008.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pYrP9TjGzbFz2Ht3xpWyVUxZF0klNQP8SAskDywQ8PKXJ1vEPDLPF4akXE6QAybl3GJPkT0M3xVc_l3tRSLtxUHZPb7jq7Et5O1dbwZ28fPU/IMG-20141121-WA0009.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pWR2am6DDZzoFDqqWoxy4CYM8yi7i4n_RKETzq-7btrNe8_XXRxWKnrIXuwkTQ2tn2Lrq5nDJBgyJV86_s76eIOOAArKVfPmuHY_es_1EXE0/IMG-20141121-WA0010.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p-G8fnid3Ar2oWMNJYFQ4S263iVQlo4XceQR17gT4elI-DLffn91AvNrpLu9q8qZiq0MQeha9mQgAeUV2iwRCI2AQm0kbqkCGIWKEExAGXE0/IMG-20141121-WA0012.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pDUJUif1wKJ-cbV6iH1_djYQCPbFIzXBn5NMDK31j48xZpkPAxL0DIoUAD9GqwXN5QCnrkaJzNbulHXFTZ6N7YGkQlS6WqHEX_SWR_cN6NeE/IMG-20141121-WA0011.jpg?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: clive on November 23, 2014, 09:24:19 PM
Furb, so happy you put up a picture of a car in the background as I thought for a second you was spraying the shell in your bathroom with the shower curtain in the picture :Giggle:Giggle

Can\'t wait to see the car in paint and then up n running  :Thumbs-up

I will hide my poor used example in the shadows when this hits the road :rollin
Title: RE-Furb.nl RX-4 project
Post by: Furb on November 23, 2014, 10:08:04 PM
Haha i wish my bathroom was big enough for that ;)
This is my painters prep room, where it\'s been taking up space for over 8 months.
I\'m really happy the end is getting near!

No hiding Clive, we need to drive it side by side on the road!
Title: RE-Furb.nl RX-4 project
Post by: Casey on November 24, 2014, 09:57:55 AM
Quote from: Furb;884306
No hiding Clive, we need to drive it side by side on the road!

That would be a great sight to see. Awesome restoration work, loving it :Thumbs-up
Title: RE-Furb.nl RX-4 project
Post by: Furb on November 25, 2014, 02:53:51 PM
fitted an oil supply to the float bowls so that i get a bit of premix next to the housing injectors for better lubrication of the apex-seals. its also adjustable so i can prevent saturation of the float bowls
(https://wm6miw.bl3302.livefilestore.com/y2pI76WManAK6lXb4hc-SIwUIZROgaPjRen_d9RxZt_T82tz9daJEG6aQgs0v4gLCghdjpfAyXS69XvG7t6MYk1Mj7UBc4bo2KxuTQ0mYcHjhs/IMAG0127.jpg?psid=1)

made a bracket for the throttle and choke cables
(https://wm6miw.bl3302.livefilestore.com/y2pxnIuzHI7yJdn8sHXApOsDPj28AFddwTWBw6fWyHLgFvFB2jiW5XJyowYj-BCWbgz7p0ZCe-dFVRO4MR8HFHYBIA4O5kLKNVO9e9lT31TekQ/IMAG0128.jpg?psid=1)
Title: RE-Furb.nl RX-4 project
Post by: clive on November 25, 2014, 08:05:07 PM
Furb, just an observation,

I am sure the RX-4 takes its oil in under the venturies which means the oil gets washed in with a petrol spray.

I am a little worried that you may clog up some of the small jets doing it the way you are ?

If you want I will pull the air filter off the RX-4 and double check
Title: RE-Furb.nl RX-4 project
Post by: Furb on November 25, 2014, 09:50:29 PM
Many different ways to do it.
Feeding it into the float bowl is something that has been done many times on various types of carb.

It\'s not even that much, cause it\'s only 1 line feeding 1 carb feeding 1 rotor.
The amount of fuel going through it should flush it more then enough.
I can also adjust the flow on these fittings, to find the right amount of premix.

If that doesn\'t work out after all, I can always plug up the holes and add fittings to the manifold.
but I doubt it will be an issue
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on December 07, 2014, 08:39:36 PM
finally finished my throttle and choke linkages of the carb setup
once the manifold is done, i will do the final adjustments and tack everything in place

heated and moulded the stock oil supply lines to fit in the new situation
(https://wm6miw.bl3302.livefilestore.com/y2pSxKyyoYXDAhRz4oftxNg7rtBtrUaEDeujzokFQyGRQJMPWDbo4A5OBdvSbIA_XZf5OldVRat--KP4MkaONNVX7pNktRYqBtrfVsDav8fW2Y/DSC02210.JPG?psid=1)

made the mechanical link between throttle and oil pump
(https://wm6miw.bl3302.livefilestore.com/y2p_WO5wooewFGtgx129u22PqHUaoUcJ6HOlZT6rhwIgmOtQwBffKVrXAW09BoHHrux7mBVo8iFNIhBKVaAGfuvYsbQccseavHOiHXT6mvQxJg/DSC02211.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pqfJQvZoCE8Aj8-yPNJ8fY0naQDdr_i-gfSyTQ5faidFXYhO2MxXBcY2Ofo7lR9UptVPnpRO6FFFZAXtjxU345MI25i4faXgl3YuYCK_z40o/DSC02212.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pdRT_KF9ySSbj3NwHrh_OMUI-Xa2uX7OyQywQrhxEAuN23j4tBYPRG-7WGNRiW2kcHaMuFO0uFQQ1OhWodycLVAcoxvUmnLznQxxlbrFyTsw/DSC02213.JPG?psid=1)

mounted the throttle cable
(https://wm6miw.bl3302.livefilestore.com/y2p2ueb0bktiq8lvgQHSG5sA9_dBrIMAAA8BvVOgghHJVe1qeORMFJMc0Cu_YjYKVfKUV9lOkDHe3uUnHpOynB-Yo77-bpAI5ENk5uzZ8W8N3k/DSC02215.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2peGpu_eZI5_cDY2nLIHXa2Djo7lz1j4L0YcL4nz_hSl_jOYBQea5Ti6-jBLtFo0QGzk5yVTJGOxtAtl41PqnsqJuyjqrWXmG6ioJacGmvj24/DSC02214.JPG?psid=1)

choke cable can also be fitted
(https://wm6miw.bl3302.livefilestore.com/y2pCOR_ZlkJKFNk95n8sIOnN-tJzwdfo-WRElSA3TILGKDarM7UCKOEYwb0uCGkliMf91XO2ALMTlUdH9NQwCzXc5a6GoKmaDP0QdmJNEG3gcY/DSC02217.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2psyZZuA0uZ51Ht1RVE8XGqEoCHpuJLsIe4Uphu6uGOGiBuq2Hfftok8eLKu9xeYfh8joM2Cd6WGdRbG-haLcGIh_WSzIhIK4YKLs7sYm19iw/DSC02216.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pxKhkzWSs6N7FcVFYZdGkzUQtJMTR9ltDfdu6iKyqxrDbIHWxFzBShaJvqgFxnxKz-gj7KAajDA5IRV4Y16t1ng6GIpBr3sMTMZ12meEc7CY/DSC02218.JPG?psid=1)


update! it's finally got some colour ;)

first the doors in the basecoat
(https://wm6miw.bl3302.livefilestore.com/y2pMtd4q8llf4DNqriMqTUmA8kZG0k1iy51-ibEWM_sDfCNixPnWmOLVXAWn2gXSqmX2xexAWtwAXtD96jr11EfigJKpnq8fl7HUfPyLZ4xjLhI0PAPzu3BalR6YMlrXaUB/IMG-20141202-WA0002.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pkzJVX_scDgUbGXnxlClJanqmzybDlw2npbu4tvikTceXZVo8m8pujNZqmC8lMwKF6zwyxBpKp1eMVcouEiO_DENha3muhlTy0X8T3BZ8NISXN0jCY6BqPLfQs0FRAkuS/IMG-20141202-WA0003.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p9rmGo35rukbUE4kORLzvmHwuspfuIQ7UoRJaQrgDDb_vrhREzj7KPjJ-mXmixkrgM77dH4ITpeATY0hSjkZO1ksutqUfloLHBjZVJ5Tlt5XvW6Ya0set6f5knW9QFJxM/IMG-20141202-WA0005.jpg?psid=1)

the floors sprayed with a couple of layers of bodycoat for protection and noise reduction
(https://wm6miw.bl3302.livefilestore.com/y2pAKdlIOinejg5cMgF_2enHF5EjkMbDGruDqmNzwy6abn4SV_rzbF_mBbd0RqLnREtZD3OgDmwV0de6gCWBSEEZgdrNBtRn4VNAugBq0Upp6mn73lPIPZbXf8dSF8IL7D8/IMG-20141205-WA0007.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p24Pl_3nljpaPxcLMJ-6MrzM5MxnV2ePbOl9k2GGzm0k_gPAQ0kv--9em0HoKi9JsFcncri7r9d4dJrBhh5VpRwb4zcNTGmVMunk5gRrjz9_FQC-6ZR4360_-6CmcxUA8/IMG-20141205-WA0006.jpg?psid=1)

and then painted the interior
(https://wm6miw.bl3302.livefilestore.com/y2p4T4Cjy2u_uzPgyoUM3CwOYEIjIylhxDLXeGbCzF9pTGvxP5RgEjh85o0irQ6YHrcrWxrLpkHncv-YCeMopsKcvdgcel8-ovttSxhI3_112mpGPYzsqq7OT5d01GdquOa/IMG-20141207-WA0007.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pOLOpciK0GF7YFHKuHuK2nG1Gs3QUmDS8vv5_3xr8Fk08cdzKFmNaR0YpKB4ddyZPhyys37869SbJSjhxDX-lbpEpgCkTW5XQXJ-Rlkk9sjOR0WAuZcTMSz3QlUWxoDVZ/IMG-20141207-WA0006.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pr8HnYXWe_nUh9f-UZWHa1LnCOKUAsk0tZO-V1hAJzsDu798YbLlwcBiDB8Z-NdVaclRnz8dvBSTsOVWApF39Y9jUtyNojBac8naT15DddMO5ppA0aBDDOUp8FT0CgYXK/IMG-20141207-WA0009.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pmOIlEQYyHvwOlHdI3zdTSITInrQFHCWIjzjrAXPrT0FekW5SJ955Q_kTD9IWtbQdwjBSLUy0qodGpTZAwoSjFLIO-ErczLyKaBGNt9KFKIvI9ZIzFMPMRZglvzrkINPr/IMG-20141207-WA0004.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pKfgEN2_cG-UCAf6qXKmpu16xOMbCG-o1BOsRFRzjVwpTWLEViB4Ys4DNaK4zXP_JBJdxpezLareTkxRmAhD5zIRhsDFrnoencOsLxAQynvSFRfXgIIyiFEUriulD-Gwk/IMG-20141207-WA0005.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p4pw5bX0ymQ5DObZROx803P85C8EH1n_v5XQjYen9ZP1PI7Vw3mACPndU6-C8U6FN7Kc4rdXJeBJoesEw6SKdE-S4-TDvhKzvRavjgCuuTOZ5_JlyZ5ceT3rvXqsqyGbw/IMG-20141207-WA0003.jpg?psid=1)
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on December 07, 2014, 09:28:23 PM
Keeping it red then, looking good  ::)
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on December 23, 2014, 09:37:29 AM
yeah ofcourse ;)

really loved the colour of my first 929, so it was a no-brainer on the colour!
Title: Re: RE-Furb.nl RX-4 project
Post by: RobMatthews on December 25, 2014, 12:08:33 PM
I am insanely jealous!
Would your bodywork guy do mine?
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on January 12, 2015, 08:12:10 PM
finally some more serious progress :mrgreen:  :mrgreen:  :mrgreen:  :mrgreen:

pics say more then 1000 words...

(https://wm6miw.bl3302.livefilestore.com/y2p_FOwU6jGtwaPUdtWRzEABrueeGHPwLTGQogSlt3kwr-m1nYHNgvOT6s2ygm-vQ6HQB3FsawmmMLu95shHqOcMDqDSALr5txUliGEtNXbTGTRLK4PWafm15-VishwuGt5Gm7NhJ9XZ6CFJP6DMrIIPw/IMG-20150109-WA0006.jpg?psid=1p)
(https://wm6miw.bl3302.livefilestore.com/y2pNVVExhFYF68-1zZ25IWUgkktcImOy32dnl10VgfW2bafnv52EByg_NGS7tc7Axk79H1Q3CpYVBCGU5n4aTATB8v_XaKH7Sq4aUOdM66oZDwZEoQVHXdPECIMPOgCyeV8VyqzB7tZHtGgdESUqyfL_g/IMG-20150109-WA0008.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p8UoDGxB4lOF4iHI9AKQI8ZlmHMqaCynWptlP_VkzkEgQMerRrHlGlol3O4upmfP4_dTcik7z5zcZmNunTv5sJspzc-whJr9HOYYQ05GT0XsXqVDobUx66L-WbOBat0NexuUTQH7IiRlyQBxWUUE-MA/IMG-20150109-WA0007.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p9F93EoGtCmM90zSOmBdWPOQWz6aigHLa1NK_KI51lcBiII0XQdXylU7zT72ym77uFC9bddjvKzu6-i7xSMgF6hm-j7UIY41oVxwFv-AcXzyBVUWtMEXzkMmndr0pJwn-7noD1dknjUuchEL-stw2CQ/IMG-20150109-WA0013.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pLpqvgGLMwDwAkDJrCkFh-8CWEy3atbjP04uZ0N-ZB8Z7lcg9Tx0zlXdIxXoWg7pUSOEUeF1rnp27zE0T3G4a4E-gFmxR8Q4Piit9PjjB0wEtIGtdEFvIgQ-Y_-dOcMPQiWscF15227Kyy5b1Bx9aVg/IMG-20150109-WA0011.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pr4sk0-8ahHd_99iGKCASeuJiff3SLcUOjtQk7aWFS7IKnKy92uKcMHl5hQ3kL_YbT5gNfVIEsnpjq-f2eLX1V_8rix3bm1NVrJXBeYmpGcI0vUTMr8cKiYI9BP8g8YFYcbMWd2Qd777Ky81wBQ3-5Q/IMG-20150109-WA0010.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2phudaUqSKN_xOm955uhCnuZgrg7MQ8XbudvjJkDvxHVnzHQsFDqrViqO23iC8OG5SicxBX1jl98CrUphqbd0_VZeSw6h8BJ1GSFIRXd2INX8WZk9xwqeiyYG2ko2RzvlnMaUZ7ifoQiwPvW7Bp7iU9g/IMG-20150109-WA0009.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pBOSDYcPv3Vm7EnWIN90AP-7L5r3z9IDzsnifkdaXtRuZv12GCOGfhCdbedkuHy2xeWio2X8TuCtbOP8rj8Pmw9CdVYt86bOTPWQlGeKMmYU4OXCzRzz2UjLKV4jz6FHdTVN0nTe5zrb0R6hEetkcWA/IMG-20150109-WA0029.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pZCliDap2RBG-2nPXnx7x7MMRMLVlBQBEOOUglvPraPzAXUxIyt0XFHKfaxSBBScYsW_HqOtUHjSeKJ_2DrXgGDbQSHHcabHnD-AbVfr_GIzyjw-9aZ5vsqDJi0puO8FVmgSNs3-YxCtvX5o_fiWXgw/IMG-20150109-WA0028.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pA0wU8ZNss-MFNIdWb4WxX-qZEynl0o5t9EDIwSHOBe7U4VfnNemgz4hcs-JerfRqK3TEqzuW8T-xkkFfaYW4BC1i1l2rSkLDc6NFK4o7cXDhb6DTpAQygM6h9rtCcFaVe9liC1Z9y_6NUJuonuPVaA/IMG-20150109-WA0027.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pc4GevFwcW6kfvNw3nGHoCqUxXdGNZWtRb0gVmfaMNzg6dDnsXPb85tMb8_q4VF79kC1yxMEYn4Jm4yNb2rs2XYdbZHdnYP4isL4tKgCO-88Sm6byy4ReRZIYlr0fLq5njjr4LgNj-Dczsr07PF-kBA/IMG-20150109-WA0026.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pd2IM7S1cndhdb5j5WpuBcEHKTAefYcun9bhVCMn1uSgz7XE3Ya7nLw2nmnHc5I7gulo4Z-qcDBXwhOWo6oJea4soidKH7uCWSJWIk9bGB-oo6eIL1JRcrQPfaPUgqy8Q57YvnCXhQD5FTn9oux7QuA/IMG-20150109-WA0025.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pJwzmsdXdPtSUhD1_Ds5tKRw_6zQzFcWBoaTuPL9sEEJ0n5mlSZQXlU9Sy8DuzcclSiFJzjU8g9x6Tq-9r5e6rwXtx5NgWzEqRE4oI97Nf4eR3K7sfIVNFLxnVMS6I48eATLn44xCglZ5WljHcH4ndA/IMG-20150109-WA0014.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pIDbPL2nikpEoEjRf4KCkBDMlCHhMUbnwJrLnwLF9KwvVjTtdilsuZCbaMk2xxEH9Fxxp0Yk_zspFVa6FpNTTrJ__vb-dhS8VG__OVJd2E6vxvmQTjFjQrq7DEJrAN2nyJQkfAM5IkRj0cjt_4docHQ/IMG-20150109-WA0012.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pRvZ7zJQ3r9gQs6dXp_DLoxNbZN37L5djsI3COMxzdzpm0_OSZlQ-hitY075lhTg-tEWcoo_eREBMXd4wrozRDWVgGF1NZBb5bKqfV9vDI7Y8EXZK0B55mD3ka80V8QOkNITkleL96DF1MXw0TuC-7Q/IMG-20150110-WA0001.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2plBwPIvyZEmkafarHiUoeahmdHNZr_aER4IhaIbzkGZarLUx2z5T5fh5Iy65tPaOtlah3oCchghJZHOhQ9Y7v-gF_rW97qOhYxiGg0DhB9OvfF1Zd7oUXgi9S9976FY3qBjKM4X1xDxrlLKzVEVWMAg/IMG-20150110-WA0002.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pFBLpuvX1wORTHBIhEqMCf-l-lZs4VQn9dV5CcqFVz6K57ucJp678FxnmjZye84I-ncnow2GixqO4zG16FVD2AF5asXOa6qafRkw5OSyAbxBrS6vM4XffkDFqqOSD42-cW-KeyJhTCr_4gQ88rSDWEQ/IMG-20150110-WA0003.jpg?psid=1)
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on January 13, 2015, 05:08:32 AM
 :c029: :bravo_2:
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on January 13, 2015, 08:46:10 AM
 :thank-you: for doing such a thorough job to make sure another of these great and rare cars will survive.  :PDT_Armataz_01_37:
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on February 20, 2015, 06:19:58 PM
The end is near! :)

(https://wm6miw.bl3302.livefilestore.com/y2pPbeVpGbX7yJoZByV54JWXG2J6svThXel9qUcbRavW7YyZRuvz-xSoEgmewgC9WSNT7suZLhVTsqAcvb2z9DICAPPXOyNbo2sAmNxTiFYGcAmFyU3CIwSQ-5H5_wv9-vfwus55x8zXqkvtKkROiZ4lw/IMG-20150130-WA0001.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p0fggRVC6CaHEScsD5wSucl3BshUWL-I2jp_idnqmYtCu3aZk1F35XYQQt9wcuO7E3bQMruKQqH7oWhqtA8SPIGTlW7FyWNYSDtR-Xg85Uevr17_ewhyMMBe-Tcx0bPOHBMW2i91LF6QAQc9p4OJEsQ/IMG-20150130-WA0002.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2przGtmZWlDTLmhSuqHWtP19k3r1XDEvWuhrcMApXUyxA-tigSYFc6fUA5ABPSKHanSwycfciLt1EgMcaRbtq4946eqzak_p27pD_C7Vdd47dxW6tLcC6llAN1LWyHClkkRgw8VQ2bAIADQYDdyIYU-g/IMG-20150131-WA0002.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p7_IW9n9C9Tx2MpPX97kr4h-ddrxEg-tYirMI-Isznq94z1bcKl99R4sIxyhMXRcttviJLqP28YauR4ANb3r_N0vLcb0_4Y4KYh15no8ygBHMDLoQZRffRwBbQt_CZQMr41ZHVoPsA-oqobQY4cfI-A/IMG-20150131-WA0003.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p0CMYQ9D08Sd5XKRPr3PjlYtikRtfqDW00fHpW-ckYI4-MX_ahIu4eAJhTlzHSPxrXutH2voZHaXfIwDcpT4AKutfJmTw7YVF7gIgeBA_qsu6O3-Pv4rdmRuCPth1Hz1kD4i7DmbCIVtFPsOlLenDrA/IMG-20150131-WA0004.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pcYULvnTb-sdFzSjFr80Z5j-OtPeg4eKKzTUt94VfcZAMrfj7SxeHnmxiHVVLAAdovLEHlXoihtYskdUIBrMa43ExOY1EHr6KQHV9qotSBvX41tXKu3oZQHC-fYVA8KbXFZEI_b5UKAvxQ_H1YgK3Aw/IMG-20150131-WA0005.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pCy6CEAa8o4WQ3N8k76AYJJoU6HwRfX4VEc0zSIvnS93s_lTpnlZ2IbTR35-Vkg5MSKWAVEfec-4Cv04a1y2-ag5r7lc3U-88MYMp5EICKz3ki8bZz-VCT3EvqGfWyHcChlccqQooJNXRFU_drY5-GQ/IMG-20150218-WA0000.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pmhNwXe_WGrK7cmHgl9GxPjcy6LkfEE7yEH0Ugr5zMhqqUPE-mhlu1zYpc4RLQXaDcftpC6rUXTwysJ8xj0-xuariPYvIquhZTULdq-qL32QShTkr4OubWHx6i0hs8tgVlF3QfnRftuZBv1von17BjQ/IMG-20150218-WA0001.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pyeNoBsuzwwypnELg8E-29FZuvC402nKNRrNHwoySYklnhYg350G651VAWF_VAAotx-Z_xTQ_4se3fYEW8q2g7O_EIACxkwuz6G_S8hKRWE4FWRTTwvYuEjnl0scOqt0D5GEa45OTUWCGMa21DyM6iA/IMG-20150131-WA0006.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pABL0KLahBPe0E_Bj8KXK7p1s9eu576ymHQxQL1R6Ye0dyuFdgSWo4fjYOKN2R54mKhaZgOMegAJaFGrW0ZkZ9c1tlbS5RnA3hInT5HV6M405W-8RlEfAPzlhb2bjy-lvviXfI7JmMln0KcMBS4_W_g/IMG-20150218-WA0002.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pFFjhXL3nAbu9j0FDd2gkt1CwwA2iVXfXM0ZEdNKtcwdiJz8bboh_j8MsgcZH3a7HnDj2P40jQZ9nAvRPQTLZdLokEpOSPHxGt62rPSj7Zzm1--TCqdJRZWUcZ6hN-gtOXWRsgL2Sv-E9vJagnsREkQ/IMG-20150218-WA0003.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pNG3K0N5s4sdMYvXNMmxBHhmM6_wzbaBXQkYXyWPXW7fe5N7eprwHXD6CDMl69Iod1cx2sJW6eYOw6-EQb6YTrWfUNPBCmRUZHDQw4-pb92qzbu6fD5ut34GybvUjKXU6hWd-xrqUWQMtxc1yYd-kLw/IMG-20150220-WA0000.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pKA9-UzN_BMKCPEUW2wTukE4TMbDxPPqMr4RinKgLrbkIDYunyyncU_2dwbL6EjR2xT-oTQn0CyInsMavPnDkT-vtkmCJz02Tng0EXMkun3t5qZAtUjMjOeEHWufWu1Hn4WvYTLYAI5B_Cd6Rgkxnww/IMG-20150220-WA0002.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pT6NCajYzy0bFumoU_ILTppCw1n6TGco2eh6LAgsweFj1FITqNzOqVrDvPU-ATuZFnIG1NmL6Zb69JR7xuaB7qJ2v0KtlzMJ5zt1Oh2jfhF82IxcK4PlxgS9KdcaSboefHAvt3kNGvqgJD8PcOHRuAQ/IMG-20150220-WA0003.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pLIb0ZBBgMT7vcp6yrVK3aazIDW3H-kW78uWDup3LyrV81t3AneucZMp06bQigiAGirS-NmEKv-suMOCpvUZ6v0kKa8cTPjbUuQZDm5i52LsYX2pAUi7JI0S89rsLLc-ONEAUpd8by_sF4nxVoAoeBA/IMG-20150220-WA0001.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pgbupBOnCVyqNQ8LQONvH7sczlsdgSwvLyIgpOb6Qu_tGM9y8RzRujE_Ap15rkFbabqMBDWfOsV573ed0oCVBlx8yfqnK7OkjySH32W8A-4A00tq7grJeLnLPfACVvTYCQZsRmaNdKF5OzRBke6upDg/IMG-20150220-WA0005.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pyKNVLkeF2tKMhZA762F_NcYv73NvtQl0Qvs5GpmbROy6ZvMjJG8GN72WXFXyuHsoF96lvb9UcIClFZ7mrg4msLCUA5RsQEmVd7rNMai0Wl1U0WvB0jUicaQ80Ocp8D3t9LG-Vs_tqZetkVux_MpjCg/IMG-20150220-WA0004.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pP6ghnQJoUpjwuQtHhumxE5-aY9-RuDrvYGE2Cec1R6IDv_SZbtrIz3rNS_8YHeX2Qj1bw8k_tS5SoJgE4ebsXyIb73J431p1cpRKm8YF3ibIruERB6WmkU0WvbsJBO95gIHrRMxinf56niCruLQSgA/IMG-20150220-WA0006.jpg?psid=1)
Title: Re: RE-Furb.nl RX-4 project
Post by: exiled-viking on February 25, 2015, 09:09:45 PM
lovely job :PDT_Armataz_01_37:
Title: Re: RE-Furb.nl RX-4 project
Post by: california styl on March 05, 2015, 04:34:22 PM
Holy Amazing!

Cant wait to see more...good luck and keep it up...
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on May 25, 2015, 09:17:43 PM
PROGRESS!! :)

(https://wm6miw.bl3302.livefilestore.com/y2ppLLNcUbEzERW9wiNo4T7ipKMNChDNLAufcGZ5JNiOjVuMJ-GrhH8WNOfkgrDrEa98xyZhIMdn43vMpYsq_f-OFghBKbLzhcyefVl3CmtgAT6gcVSyhnEyb85-srUEn1pHMI0Ih9uuhXGNysxniTYn0Zgda36YFebq6sgi4K8gEc/IMG-20150524-WA0001.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pz0g-S81qa6zkyi-zo_QBib_RdjN2Y4fMOWrsCACDPu5f2Ah9656YMkfenMAQbQDCwnnJfTETOcVyo1g3iCYs6XVVwsvKs31-BPOzowkNIMGiGUpU09ZnSnWDXV1De7ZuXYEYn-kketVjUDj29dD7ZoXv49LJ0rcaSUbAKilCA4M/IMG-20150524-WA0003.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pzVMVIkjYhwBCsjYmDaWVaHVAIPAGx44SeTwtmlFgDdFdSNM_ZgN3tgKd0Gts1Yi7Cui2wYuU04DgomXpFJiGO4BHaDnFIh2p66J4vg8Hq88-eNtAnQ9HBQGEm5K3L0H_focbuj_EcHSHfIkbjTlMbQXjLzBS50isWh44Gu-tvmc/IMG-20150524-WA0004.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pOxSIJLqBWWECxN9_ThBN9kINh1DZpXXAmyznJNVgYMDL4l2_KEkLpojcG2NVIfLXqcW4jvn96A_G2DmoNud-vVEpHBdawOMO1sZR2TlcUUQUYb2WaYfRBK-UYI9743diJzqTAXvkiKAFmX_44n1nU_pU3EDXPGY7aVREUUG1lvQ/IMG-20150524-WA0007.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2ptFnf3Slc1ZQ9bjh42D7hJJcFj9hergfNE2T65FOJsbPOAvY0kNgUkKG4YEJRAgMP-NwXsHXhmYDje0tSXkU9TOGrQ8oc91JQ8bsVZpfra0JKXvtuO9PTCCBTD86Wqf-ZNjGNiBejcXmhGa-6Oezip-1EOp5w8Bq1Q2R-ZnN8bgE/IMG-20150524-WA0008.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pxL1po0nAq05UuCyVfNb1llCgLW3zZpQ6UQqkrc-XVyrk-v68D-OVv0EoQ0a_YZd-ZqrBz9WwT3oufD_sGNtFZBlEM6V-HqhOtOe374fphYIO4CAaFkIULA1sXz5AZsOMB_9BjsuIeEt1NZQUrblY5yeuw8i-JkJaycKxkM12tIU/IMG-20150524-WA0009.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2prVZn6-JtFVUKZLEg7hilKybwbFKFvHMN_PiWzZJLSe99ZnwcRrgmYaWgWRnPxsolbxyp5fZz381EEpEbfUCVvfV8zorx0W3tKMuI6bDFzW-UdCIZYxyjSOysWvTKaxw_FV4kuUPVntXBJMxC-3fP-IUGZIW6ZlO_fg4yjlMreCM/IMG-20150524-WA0010.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pvfL_8xz1UE_kfTutT2k3pw9NRb3QjfrrSzBlgCgsiLocRWx_CpDbMHbhBx_ZuwMY3uus5UPsj7xMwV_Hu4cTzRI0GsxTHadUiDtI1vD1GyyfjAdCPwZnrmEQ_O5Ln5_dzDCaknWuRIXPIRzUvix_McZmhovZsL1m3C8fNohuDYc/IMG-20150524-WA0017.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pXenCNnGKL0UTAEOJV6U1IP8UUJjbcyxSzvbyJBfOocHWRxK0OFxMeO6GRZp03qjsHRJOIZTutJORJyCBVtG_w1FcTuYwe7aI7rznqp51KQ2byG_ysE44T3EwHk548NezEja9banmnA9HbN9BoYyiE8BBnw02Ca4XfviLJ2KyVs4/IMG-20150524-WA0016.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2psN5Y70WhPp9RrWTmPGBOvgXrP57U36FGw6zvcfBv_R5FZo6gujUIGLITznxTX9obcz8Oz9eA1n5d_99k7oo1EmtDpqE3so3cYWpTMFabQ_OtZwShoUL0plaVZN125S3t5LE7gUmKb7newx9yZvOPe0GFTX6EJ6AgeHWXtKgsxQY/IMG-20150524-WA0015.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pn8VgNCTNaAcvbq4FmJcUEGU_CY3NqYciGHGtkTs7iSAO3LzjJkNz01L-rCi97CD0XHUmoZc4IDnErPNBx4f-9RV-o3ujWRiBnlm1f7pbEhloZc1IcvZ6u-YstOnNuUhA8mi2OyxTP8oh9bVlunPLpauB0Sc5ymw8_FlPm8LlcZI/IMG-20150524-WA0014.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2prDoWwgCLrbuz3o5dE9IGua0BzbOHZwRsOvtC6xylyI17rzoB0u4bBrjHAg7IucuMpaStgDILY977EL_Jz7VcxmNapEcrwVPXIlYIUAV1HNuVF8UJhj2ZZPf5bo-qL99A2JMywqaInW2hQSqS0VM5kXBQXx-SHJjkViVFCnWO_q0/IMG-20150524-WA0012.jpg)
(https://wm6miw.bl3302.livefilestore.com/y2pQ15zeQaFthfc7QAkl7xMJVo8VAYSygicPd6_r1J5RlgeP7J3ImJEhV0wcZp9GKVfNHsApXujEtv1FbidH7IxwkQSAL4eNnRK2zAvfoFhVTqBNAScMs0U_KVYE9oJa725f5zmWErUMyDEjAb1VBRLahM4xXuSFnjJpOLIXdPDSvo/IMG-20150524-WA0018.jpg)
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on May 26, 2015, 12:43:30 PM
 :c029: :You_Rock_Emoticon:
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on May 26, 2015, 12:51:44 PM
  :c029::sign0098:  :great: :PDT_Armataz_01_37:
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on June 01, 2015, 08:21:55 PM
some time ago i sold a kidney on Ebay, or rather swapped it for this RX-3 SP steering wheel

(https://wm6miw.bl3302.livefilestore.com/y2peK2SRqAIUa3nBIcdxQ5eIoskHLbwZGIl2kLAi5Kupw6sYC0qtrvYw8pNJYpkt-qzrzCRxStjzx9TTGqOKkMqOWi6_Algoa5BY80KtwUak-_RUBlfL8wctHLoDC545rL-srW8sHPiC6ajn1YLT7R066A7EqbSkx9BWQOh3CEfgXE/IMAG0220.jpg)

and finally, after exactly 15 months, the car has been dropped off back home
good things come to those who wait, damn that is so true!
the quality is TOP NOTCH
there are some miniscule faults, like normal, but the car hasnt even been touched or polished after paint.
i will be putting it back together first and when that is finished the paint will have a final check and the car will be polished

(https://wm6miw.bl3302.livefilestore.com/y2pZihWctZB4FVSEvihdHLh_Nhmh-rW6rMoD2ZTco1ZJldcKG2duc6VmVuDCcmWmVsLg_n8zCMWh8nAG3XTgVMfiiIu4InIl1WhkbLo_zfPQj6bXjJDPThI4EGWNDN-1y3WO22ibSpq6LspzRnDk3Gw6e5pELd9Jrf7gVD0AoMQXAI/DSC02740.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pMkyxJkc64LxLlj6SZnLm3dT0yNXWHlN9WpWgwlzV50Y1eAUy_sOehRWCRZP2z1zAMYWxIiyB6RlKPFZTUQCjkagzS1vxzx2nZfDjWaI2kQGAB53WYGKpNYzxloXxsobFn-nn_ik2vyuk__RWj9ZyoKWgmIlKEVy7G3cVwsx5lEE/DSC02742.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2p3-q4fnrzFEhCuCe3bWUnIB3_YogYz-fOgrkjyIlmbOA2LFJWA9bwAEfVNFfTsA_5xoP-4eRP8j3RM2e5iuVxqYfxYb9pXCt-N_w_mn2YIVfsVFU4FXU1CKzOPtNLsiAAEi299iS_79g7b9J25Tm9hJFrWSKBGiSUegvwNmjxOzM/DSC02743.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pBrqbfyedW39YGxsdRnRdrD08L7s9LSEYUi5RQPEAIx99xYi9MHa3CILIWq80HRp2nUGvTnmbdEY5NEU2LmpDV9B4NtnIs3FcfCfvgALVPBdEzcHUcCU9lO2OC79bDyb0KAxvtzseEoyYLcKprvTLyWvmqHJvCa3fK_L3wIsIk1U/DSC02744.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2plYk3l5Gl526huTaHzLUGrZzco1ido2JLZ6o6-MKaZM0xs0MnpkCx27uIOdshxe_Fp9wNYwxYS1lImCDEUMeBMfeb6G6xDL9J7bq7bZEtEUhUws5DXYRBAHsoDvnACvAwwBYmBV98iSP2TyUOVO_wN8SgZdkFQgKHEWH6DUDI5Lc/DSC02745.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pm8S31mk_XE-kjKAPhhZQfX5kakx8nrvCXsabQPy5peR9zF3R_Qj8HuhpjlJJqvoTSyP7MuY7zxXNboDekhCXPsiVIPXT7Raa5i9OteX424DscyuML50krBo6brEIHkz7Yx5P6ZCpUwq7onaJb0CSm9LyXyYkZYSr8zkODaZZZno/DSC02746.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pC7C5zJw74uGmwkFNdKemk4v1rwSBbtop6Pgwenm94y7ng5CVyEcMnnIC-YjnQO_0VnU6V5YptrKYbGCi761obLW5ZFD6L1HMWlSZGt1jHIQ2rD1ACzglEdaX58gRlIomxx7nCVDDKKG4LNghHL95ToikULMatBXw4fv_joFpfMI/DSC02747.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2p74CuSfpvpl3-fn5PShjTC3EQmh-Zq9qII-LPs0OOTpp3ANiLhb0sIiPVkQJvqWhPxA-vimZpOyPxIQq_solG_vt95VVLd29nDIPsoVYgebfAtq5wCRqim5dAOUgEdZ5waKwVYajqXGCdk6MOd0d9YyxVNQkNWz1Hw9fypr5CYrQ/DSC02749.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pVTHUAqjMiVOiOG3AKJROOY-X4NaQ8bLE6eu5my4IH1vl8Sk42KDKFSRP1eoVoX6GIqah5re7S2xEm1aEpLqCLyO_-ocKms7Ao-ZB-ECTD1XhIMgUkJYg_NlrhqDgjN6u9sA61Ld8A3tuJTwWdkQO53iDxB-hcSyqfJioi3jBYP8/DSC02751.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pbOqNqD-dLDUa33186e5E5DYu07WBWN-TxpCej01idMr9G_vHfDlla8OM106WRrcSZAmpdfDWe_2kOOqaknMp0eWm1EA5v82kxQCu7BubBy0eStCoslkLGb3hPWLLw5SGqs4PbKlXbthcTR0llClbGgTj1WXYkFf7CAASsyWui54/DSC02752.JPG)


already pretty dusty inside
(https://wm6miw.bl3302.livefilestore.com/y2p24Qw1cqJ2jddRvRQL1NhwXJqntcN4OvkQrcpi--x1zd_eus_KDsSlnM6vO1WGZ5jNBxI40Zy82WIXfWWG6apUBKJHJQOOytOrDmqyZP9xv2qHVCJTJTRvyqFLj5VkbMvTk3OFiD21zd3kMuYuITS-MtOr2EasxR6k7AxJrlGzb0/DSC02750.JPG)

the build can finally begin! :)
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on June 01, 2015, 08:37:57 PM
Wow, I think that's the only word needed  :00123102:
Title: Re: RE-Furb.nl RX-4 project
Post by: california styl on June 03, 2015, 07:18:12 PM
phwoooaar!

Good luck with the build...
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on June 04, 2015, 03:32:56 AM
Looking really good! :)

Hmm, you seem to have some old VW busses in storage. :)
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on June 07, 2015, 09:09:06 PM
thnx guys! yeah those VW's are from my friend who owns the garage, its his business


this weekend was the first that i had time to get some work done, so i made some serious progress
the full suspension was ready for mounting, so i started with this

Car needed to go from storage into the workshop, so i took the time to get some pics in the sun
(https://wm6miw.bl3302.livefilestore.com/y2p26VXRrSw22dNdnlfc_plCt1YPn7gubnc5l8LNWOIRrcVpOusDuMWb6dmWPsaKWcRVGPXZkC8tm4oPfiKKCpZr1L3McFN-_gy865ybQzxeY2W3fGNpj-CTU5lmSLOewW-j515KGMLWNknp0B0pF1zKGUTbXBwXyllURXrCZU87Ss/DSC02753.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2p8m71fwUJY9DpEZ99DUVpZpWRfwPXxvuO5DG2IpbIfEddOigMs1c8mlfWChcLqZbFTjirDyR5Lz8lagIgTCEgaUWefejecDEWS6f4COOeaMl2kQoE6zxYC9qHYgxnRe_oRTl9itG2y95sosQt8qXVe4TTOXnEMdNrItMolzNHNDQ/DSC02758.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pukXs9pA30vP1bqzYZrIP7GguPfwimSV9urxGZUh7D5Yl6cFp15kRlqZQQpM_fZkmrEMk_HHjXRbD6xLB3rB5VwfbP4dsCY9PMvi4Rp2oQtpFzeYVmI0ri8CfoxwmC8qx2RJ6aagiFxWO4l_lYLg3Wh47gqknXNruweNfaB2gX7M/DSC02760.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pYAUK155zm6BMhLWIszTEAvN2OPmg4LzPHvHklMtfSU6xb684e2aoXHaO8IqQ30n_zljlSrfVJYFIm4FnDq245A71vxOuRtc2opONP3GBUI09N4UegwjnR2Bjh-jj0xzaYadnlTrrhCQFlzsMlIb5xao39_HuEy7w6Pd8HfKEH2I/DSC02762.JPG)

rear suspension was ready for mounting on a cart, so i put a jack under it bolted straight on
(https://wm6miw.bl3302.livefilestore.com/y2pSQVgkmUZFMlGbyoenjB_6fsF4GdgQSLZgx6EJTaIeo57-4J4oo6J378AGxYYSoWsxkqbum9zNFQa_4-SIg4ihSQjVZsZOjZ8k5pXtapWsHQ6Mh3f1JdNSUOTXVqKVktNpF4PBOAfQ4db95mLzbS7EneIwSlBLlusXacEE6McLQw/DSC02765.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pAe8P7XuCK89m9Z1M3uTQY8wvKyLP6XlUXme-KywZqkF-xpE0JtW-AKXs7iT4h2MxrS7AXO1X4DPBmyZdJAq4ZqcAjZExNDCpNrwsmdM-GQ68Wx_T7xENxuWU9wDywdWCk43z4ed2_aTyczydjxvB014eMgY7MM9tsSznSMHzLYQ/DSC02766.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pbzdcjrKwP1X7UUZMBNYcYj7gcNwl1zRynXRBi9ZzJDZLC--VB3KNYWgJ8oReMrQwD8HYp3LShejvNdcezJ-QBfN0ek4JcfvxZbbNkp7ecHTEgS9j8kE4hYEG5JIYoImcnZBLXV8Lt-HBgstRs0aJGlTcF1729e7jPJs8v2ueyNk/DSC02768.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2peKNMWAMsNJUIGuYB7_ceJZjpWHSe2WTck__OGGVPxJ-ulfgg6CB7_EGaIYY339PgpRd0tX3GZi0TSbLfcKTc4K6HhZ7Z1HYvpQplNEQPUtRXO1v4qSoDODJ2_krXFqqjq8AHlKaiGiaD9dWnfokPvBhQvW_zZnkTgDRNlglaKGc/IMAG0288.jpg)

engine and gearbox were also ready for the testfit, so i used the same trick
(https://wm6miw.bl3302.livefilestore.com/y2pEHZrTl5CtbGT4_7qYqsJfYkfxR18ahcJoUDpxVge25IGjLF_pFn2R7kL-S28G7QYZBm9cXBdnr_a78mn3KQSWmH29w5utPQfO-ymH5dqmre03ublTJC7lkgtp_xfeb1Qe_WA-SwuGnnRDd8jPsU0PfAu0phI0xdki8fmGtzAW6Q/DSC02769.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pGVQr-Iz1_KwuJsHsHZcqlG7FNr0w-PljYJQof6qhx0EVG3PmYHloMa3NH01VeRKCVmP3VmFB8RQVR-Au6QmIDH-dfXFTVFXll_iOM8DgYPGOIQwPyAb3SXMEJVjM02TzpznGvSyBRfwm592XmfQMi6kUHIlwjgw6sWzGugD4pK8/DSC02771.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2ptRU-m0RmP-d87gPTkdS3nm0DaHIYqE1z8bIu4HvC4vB_1sDmbxVp2cXjlzzbPhcs9P5OjNn9EIWvmBlFTyLDWiQV3QLOmxORUzUUzctf80_eshIWKKATHv_ZYiBJ7UztzWtJBgAMAqSS3Q2ehpjk6FYFuBEzOK1kPC5cwt2u9M4/DSC02772.JPG)

then mounted the front suspension and steering
(https://wm6miw.bl3302.livefilestore.com/y2p30J4EEOV2ZCVHhO_wOHA1AxsHnR4DhQWE-BW4Dxe3f50ezZpHB4N89-qkh09lZXRbELaKBriI0KQrWzFoZEPOjA0wH9V5iDL6_mYB23Lvz_cQtMoJ5L5V-uuY4gBj_dnPfBgcG1jgfljQsMEAA2q75WP7D-8dCvJcAr6ldcEhd8/DSC02773.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pGUZQAOkcsK3Mwc0eLDY76Pyxswi3wk6vztLE-Rz7zY25rFtvjNq26GFOfZ1UjNzZQAmp6D3WAxcn2ESbNUfRCtBNbCuzT7DVqClyQkBdu1-h_SxjsUPf5uv1J7BiSgDiReTlpo-4mbIapKAozExCW5qyTxdUL3HEIdYiqsmPcLc/DSC02774.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pHSQOuIS9cmJakw0mUghNwiqRNBxs46cPGkSKjzgcyCVFXDXNMuuDZzPekYyzRMTyhmHNG1l2xHpUgdQwnoiSkYujoqpA6GMarobqPbgL0EV4CJvOPkjrU0EvnB6gm3m1AbmkvFA9vF7Q5cCj0Uw6NV_Jii4nK5-nTicNvaAZsvc/DSC02775.JPG)

test fitted the wheels
(https://wm6miw.bl3302.livefilestore.com/y2pzmJvCMaO0oDTCLq-LL0_bqPDsP1VpOqpdvs7w_MdLEhhB03dfhf6PUeCZl3qnyytU8-e9B9KrVb_qyVy7AQE-DYyf9FUkn_NoO3c8rerm4gshnQj0_ORZxquzOn8mm6ML2PXXNrnKCjxIPrh27ihIuTAx8C-vZvSRsxuKoyOotI/DSC02778.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pEr5FENthMygKJ_K0-N8E8cEPKay63VtJ49Ek0IrfuSlExNvXJP81PvBtcq1hkLJEOkGbteyLc8IvUQtr7tOMABVyOfg16lyoxzp2HO74_7sG6yZODR0nEGVSn1mPDljrBJj32REV4J7l4z7zYscMBGjwnyc_PaS6pW24ohdVXss/DSC02779.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pNvIUmwO14jEzdZvGRD8HdhphGXRYNpU1Hz58PVf0iN6Yt3dN7AzRFxuhIKtfrl9enmUkdz2x5WklqC_zj4rpZtccUD9e43PeFG4qlCw7-LtAsiLotSDAko5z59RKCDWbn9V35yT-48f3GF0VsOCyMnORq8p35SQVhamv2k9BJrM/IMAG0295.jpg)

but because i dont know which tyre size i was gonna run, i mounted some steelies first.
car is rolling and steering again :)
(https://wm6miw.bl3302.livefilestore.com/y2p0SvmXtsyFwAhDIr60Kpv7-0GP_SsXhKtVNEz0UPl6OX8O1-0R5Kad7aoGA8nTvCPgYp6Sw92WAVMVTFpalIgbN3423kgJ7_K1pSTccha3HK7mMnfVim4wD8-uM7yamJtBii8CV4N1g70y8Vpmq19cp1xdZpiNpnhqCcLPoRsEkI/DSC02780.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2peqpUVeDZA3EWHaarVmfQ_wa3w5WmSGANtnXpW2z0EWuzxygBHRmZayD3e87Cfo5Z39StTqjF3fjVKjz5lBtk3SGaNqcStsMaqpyh9SfXQCGC5IvABVkCufCyULxJW8JRLtzndtjJ4kiiBrhyG6u0JM-i360AjYT4szV2-i8-0f0/DSC02781.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pNY9CvIuTsZBD9IqY2Y8vMr1D-rqSLosciGxc1KSxgwrpDuyIIs8_Oxmec-J_rasDpaGsrxB6Y0DtxcsMtMtVAHuDfmOQ7SKcv94axZEcu_J_KqBEO32SuOJn-kEP_MVW2buuH3dZUpSYSAb55g3uYo4tmNOa-1Ki-2Ic_RaejWc/DSC02782.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pJMasx9HsMo2X73vS5O2yWE9kTCHY4hQoInIbDDMC_3Ytyamb_YimAAPnI1M0UxGUEE8fkRogr3pLi2ls2eTw3gH1hErBxusQfWFmtvvqVcXzBDB3qCVKwj54x0-Mc6s7yj8ngLFfx3zgwRKutmtpOlaC4InnQNQTpIYO9rH0Ehg/DSC02785.JPG)
(https://wm6miw.bl3302.livefilestore.com/y2pgsdlb7hutnd7NeERWuYEQkn0ZUx3RxHjiI0e9FolgJ0flApEybxRPO1ZdCCUB_tHOdQlMhIiR1wwefnbGVr5rmRldQBvatuUCs27L_XRhdROXuuP--8SaBBeYyQZVuMIGJzY_3nxRH-AWJ97Y6DDtwq8PKo6SayYVHpSqP3Z8W0/DSC02786.JPG)

to be continued...
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on June 11, 2015, 08:27:57 PM
Hmmm, pictures aren't working for me in the last post?
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on June 12, 2015, 03:31:47 AM
I cant see them either :/
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on June 14, 2015, 10:35:01 PM
yeah they didnt work and i cant figure out why not.
i know its a sharing rights issue, but they were uploaded in the same folder..

lets hope this works now

lots of work done this weekend!





(https://wm6miw.bl3302.livefilestore.com/y2pmTM0Yk4oOPab0QKbfCjX35gLwP5tz9dBySXk3QOauncp_tDkEeYDTqc4E_-5vR6PBA8JTDi70_7znhq_p3WOGCYS2DcPz7Mce73lXOOah5VPQ5sr2DF0Z57Z1WqaIyv6EWInNeuNMDNiPWwj2f1ojlqXuqNUdgTlacOVwu0Gtcc/DSC02753.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pTS_G8C-mAZBCx20Icmt2YCkJi4We2HdqN-aa-uYbEtaEsA4qrTOWihsEZMzg0NXyEauddE85uvhZWaOGXaQ_bK1xAOKG-vM40-H0jEbIjbua492gQtv4LtEY7l3O4iXUBu9KEHmBmf1UMb_c8SCxZS2OAz8Iu9tiCRoYANP6WUQ/DSC02758.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p3ze68Wc5BzN2zMCHhGZNIh4bzBDiI-lzZXTcfW8-ZTKu_Zr6erGjBoF9tOncUWyBSTwUhQr80HJvWx6mJqibLucyQelSVciqWnurO2HRk8aey4NfwNFEDYNcVyQTvvX3zLXu7i1WNlwseKDv2OohqdB31Q32VoyoCOz-BfiD4ns/DSC02760.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pVD_Wawh55R3drTa9LcR1dSApX1H4enrsHguE9VP2GiXVreD17SVgLabj9YSnbwirJSSwY5Ub0eKAh-_Mfoh0rKqrNFfKAX_BxVWb7dKbRhRIMPWao57ujvptgfpPsxdOTuKfB0AYTbrMtOEOcU6VpmAOfy1gALo0mKxoieafcP4/DSC02762.JPG?psid=1)


(https://wm6miw.bl3302.livefilestore.com/y2pVyuDuIxTGXqReaojU_EDZp7A-LBoHywTdO_J2upB4P6vdK76pUwMYgDSAHkuZrb5nd-Nv9ML5ClOwOOglbd41qS0J8iSobhq5K4oSqcFsEooWVpDK_R22OIXMQfsfw-rx3W7kXLsTYK-HauauvrsBjBPPWWFbjg85EzcgAREsP4/DSC02765.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pxM-p5PlDa7jWT2WFaAhbU5wE-XiXH_QvlyIFr0rGGtz8Qu1c4oMv2jSrhb9nXIJAP9UWAqXTdNDyfFR2cjI08pEHufA1sJ3VkJll9OjXxnJGz2-va82ZwyiI7KNrmTpM_nfcKD_BRbxtgLqW9KQEg06oDqceeaqALfvj82WbcKU/IMAG0288.jpg?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pCjudy_Fq2qHBEZZJGh_C2N40-DsfuX5FCmoDPGIEBmwOXNanNPbUKmlvTqhnqtviLQMnEaYhPAFD4LAyZneuHAjLBOOyl28ZUAL6609k7TbXj91hlTwHPgC3cyD81mzohBSSO9x25l2ue-2qPD7mHCRqP3ITMOHUlECaKT7QBP0/DSC02768.JPG?psid=1)

(https://wm6miw.bl3302.livefilestore.com/y2pO3jXgDpOVqchecPaarXtHYlOQWQM6anrPp16zN4LrZ3wXQZVEajPLZb64dR8CrddXjCrdOHOO5XwGgmjfWTArpYKKVP-UmVfXTivG0JyOqWxT_PTEMUOn_RMCPCfT0Ntp0X5Wwq-W67E2obh0YExVreQFJKU_gnCzZLVMLt_tYU/DSC02769.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pBcq57RWPSmMNfPOB6l5JLj1Ixrmx0eCMqeHXoU6N2JmSRoDnTNs4mOTF_zk7q_oZ5mEUbCudTey2G3_-jOpzQ13ZKFbabuNf2rbX34rGtEs_2hWXTs1QMzt3if415MgtVrZef9imYhwijlCYjajaf1j1n-0DrhnjCIFTgFgW3W0/DSC02771.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pkrqD3piqOoTiwMA2ydROsI4pS9_RcHnUZoueO3hD5TZlrHpdh5jELXcKQ09dhbJXYCaEKpHeHXjW_NsldK6u2erh1tdaOHNUsY0y7xcswpAjQ-Jq8kP5B4v2RWpZs4W7Pp6pMowQ6TqVx1BolkUaqMni774u4bUoWaRkYNg8BCU/DSC02772.JPG?psid=1)

(https://wm6miw.bl3302.livefilestore.com/y2pIeDM3EMak08Lr6E1utJKMNbe4x5YzqJhxhKEfR9_s5PjpOKI7-7aZS-edmDb7wJeyd8fbzYiwi6F37xSQ4k6C7HHmpwDHF80VYA_IX-ne2Xjz1N_qNFR979F3vKK0XF7BFH8MI7v-RPofOyryIUGrtp-zYEqZPAaPeADTnF7KnQ/DSC02773.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pBx9kag3vnYeotwGn2zNJJSdevrhxApZQpOg3Sb-2eiJDz2dvnbHE3ifllZVi2s7w5AeGf743vAC4QYLGcGRvfqeYBz6etVh1mLj5EVdc9rYfaojdYzn3ezaQbRHMZbhDI_TIbv7TjmVO0XA8zvwr4-mLtx9rzMpSW9Ys5L76UAc/DSC02774.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pkKQGYMosFJ7RWhbzj0KvpZsdv2SQbti1HVq9ol3TJB6jHuJIzwg8VEurgudpJ34M3riHM5KZA8oGXUTwba__Yz1_fLNUjjLSWubDsy9morz9mhT6uhEiSE2TuRCXU_DZO-ZqIAE3jXOhVDu5saW_sI8a2Q7_4X90JMWWjHYvMHc/DSC02775.JPG?psid=1)

(https://wm6miw.bl3302.livefilestore.com/y2pkysflo5-3anDasRlDZtxuVHrGOcSx1yUxJN0Vo-8GfnE8iaC7EhOXW3cw1Fr-UQmK6iGmrJmFrJnFf7LRDe3YjPIZBgvAkSd2AVl4Xk72IsZU36Q1RMhdnU2x0kzSX757PPfYR8wtX8hVPO2NWxHd-Ri7xBN2YymIvTxz27jIak/DSC02778.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p-qh1IhUwkJBbpqUl3_f0j1VZqJDyKnXHBv9IurSmqXMbxxkvPL0MWvk_IMkGGW6SzC_1Ov5muxvIyN_tMgFL88cXzDf-mT87PahQi_EtSHUGe8yBalBwPRoLZrtaGG_xR0W8yMR7Fjr-U9K5QQJ-5OeO7Yflu3La5Z38R9T5yBA/DSC02779.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2prJRl2cuUZybos-RBigX26f2lB2KJDG3MuNvwGvj6qWtAprYRqQknGAx8OAkSjhaQB-ScjxbDEKxSpNeTXwO7e7VWdA1N0BrG8-Ag_tRp4R4HKJITjGilnmdAsCpoeMqzdE5myOTKVYlHmyLAs-c2PN4xEmqJClj8R0bxxO4xBas/IMAG0295.jpg?psid=1)

(https://wm6miw.bl3302.livefilestore.com/y2pKrtoEPKXqBieC4Lev2S-bEYWP94CVJZzm8xw3b6dILQZ_NVHp8QILKajvHB8lYQMGJkaUI10NAePnJFgnamxbSBQz1LPhvVx4Jc-yT6E9ptTafuI6MR2M3icKd2EYAJesCs2zgqrEhOXxPqGuBsH739NVZAwyNJKQsiN6vJ0nv4/DSC02780.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2pdxUwLfaTPJjNLmu1ujX3d2hARQrlCTWHTRUVmX_4X7CSwqjyQtUyygm56o8_2LJmyjFBnHXF5h5O-rEvD5qzgUOoyWrO7Oc0FoHkAfU9v5VFaqkrRbtFfAmiRkFU1iL0UXXaIFLq0HkSWtfgwnjOwTa3TLE3xFxC4DpDH3aLGbk/DSC02781.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p_GEcptzjMctiXrVIpn8oF1mjjdfC6PgynLPULy4YgUOrIpgJHgo1K7wUt2AZDG8Btb6E_-2NVJlVIUNh5wxmyCJyhBzCXcAh5lzK9goZ03FbmRKAa4RE9B2X8zVb_wNlMmeMrM3mfg1PE2IyX_u6A8i1Kn70-Sw_Zq82W8clKtQ/DSC02782.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p4LNX1Wvp5qW4ZJgE74f5be2gmlWbXFpt1iYrepzWaoj-OMaPwlp1X4HWELpHYmuLGFIEESAFTpA2dhTnUn5L0gN0vj-5jLKPXPngWkAbQ3Yn1dzQWi8xSthaUrKJ3ENobonW8Pv6Jp25bm0M3h2kbBbim_tg9c0Z0zPHnQbV9-4/DSC02785.JPG?psid=1)
(https://wm6miw.bl3302.livefilestore.com/y2p-sMCxQRRF5x81-KqO6_3Qzw5_k95E1ggFK-sHyPFOwA6AYWUrv46Y1LNZqeyb0WmcbFnOPJPcaLbQIMNGyuEYbYwotJlCaNNdNEuJEzjCmz0_0RfJ6ie-0V4CjSuiZPmNFFlG6mM0sgg9xlOUziEoiWk7Iji_IOjYaqksplqHL8/DSC02786.JPG?psid=1)

to be continued...
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on June 14, 2015, 11:23:53 PM
 :sign0098: just amazing....
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on June 15, 2015, 05:19:54 AM
Looks stunning.....gonna look mean on those rims.
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on June 15, 2015, 08:53:48 AM
Good to see it up on its feet  :)
Title: Re: RE-Furb.nl RX-4 project
Post by: california styl on July 23, 2015, 01:59:38 PM
I see no pics... 8( :(
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on July 23, 2015, 04:47:25 PM
I cant see those picks either, from two previous updates... :(
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on July 23, 2015, 07:03:06 PM
I know.. the server I use doesn't want to work anymore and I can't figure out why.
They worked for a couple of hours, and then no more, Every time...
While they are in the same folder as the older pictures and have the same viewing rights.

Tired of trying to get it to work, so I am now focussing on the car, not on posting pictures.
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on July 23, 2015, 07:04:06 PM
If you really want to see some pics , Find me on facebook: Ferdi van Hout
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on July 24, 2015, 04:30:30 AM
Ok, thats weird. Well, thanks anyway. :)
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on October 04, 2015, 08:18:58 PM
Sneak preview...

(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12094835_1226161804077032_3142029121786743534_o.jpg)
Title: Re: RE-Furb.nl RX-4 project
Post by: exiled-viking on October 04, 2015, 08:51:41 PM
very very very nice ;)
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on October 04, 2015, 10:57:57 PM
Beautiful ! - Please can you post up the pictures on here that are one Facebook, I am sure we would all love to see more of this car  :sign0098: 
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on October 05, 2015, 12:49:54 AM
Not on FB so yes pls for more photos...just re -read from start to finish. Epic.
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on October 05, 2015, 07:43:35 AM
Getting there 8) well done.
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on October 05, 2015, 02:30:32 PM
Piccies pls pls pls pls.....Please!
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on October 05, 2015, 10:19:16 PM
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/12109794_1227014003991812_7879660325596515842_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12138316_1227014027325143_4411936987887006153_o.jpg)
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on January 18, 2016, 09:37:43 PM
haven't been on the forums much, so i here is a long awaited update.
still need to make decent pics and update all my albums.

long story short, car is nearly finished!

need to put on the wheels and mirrors, and it is visually done :)

ne4ed to get the intake manifold, exhaust and drive shaft made, but it looks like i will be able to drive it in the summer

(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfp1/t31.0-8/12615571_1290529787640233_3903309791416983014_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12615320_1290529830973562_5329900429893754192_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xap1/t31.0-8/12485907_1290529834306895_3171072802769374954_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xat1/t31.0-8/12484627_1290529850973560_6119525370869654339_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xal1/t31.0-8/12605463_1290529907640221_2119436454488740772_o.jpg)

more to come... ;)
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on January 19, 2016, 05:30:11 AM
As I said in Facebook, she is just stunning!!! Absolutely beautiful  :P
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on January 19, 2016, 07:23:16 AM
Must give you immense satisfaction seeing it nearly finished. Epic job!
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on January 19, 2016, 02:03:43 PM
definitely! can't wait to get it all up and running
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on February 09, 2016, 08:44:08 PM
big update with a lot of pictures that were missing so far... ENJOY! ;)


fitted all the ORIGINAL windows
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfa1/t31.0-8/12646877_1304320392927839_5883294099750326519_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xlp1/t31.0-8/12672203_1304320389594506_462415375909157869_o.jpg)

redone all the wiring
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/12697299_1304320382927840_5070535470118223511_o.jpg)

engine bay starting to get filled
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12672032_1304320422927836_9216384032249993073_o.jpg)

sound proofed the entire car with Dynamat and added heat resistant Dynaliner
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xap1/t31.0-8/12696916_1304320519594493_5766700829551685923_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/12698246_1304320566261155_5684090433950449418_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpa1/t31.0-8/12695072_1304321416261070_8128356939146648864_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12672032_1304320546261157_972568526800823191_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12710871_1304320556261156_3473311593001684207_o.jpg)

took the car out for a quick peek
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xal1/t31.0-8/1498860_1304320429594502_3170930055297554780_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12697076_1304320439594501_3445220999318525413_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12697111_1304320506261161_2662809496665046920_o.jpg)

started on the interior
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtl1/t31.0-8/12710834_1304320586261153_4440268801048827102_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfa1/t31.0-8/12694536_1304321442927734_8974828326850869350_o.jpg)

Retrosound Model 2 radio, modern tech with classic looks
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12711126_1304321456261066_3781542861221149751_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12672027_1304321502927728_6233298565477551339_o.jpg)

dash all back together again and fitted my rare Mazda RX-3 SP steering wheel
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfp1/t31.0-8/12716120_1304321069594438_6007705661243731204_o.jpg)

Custom gauges looking awesome
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/12694668_1304321066261105_6183622281671971034_o.jpg)


Made a nice system from parts i still had lying around, fits perfect in the spare wheel well
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xla1/t31.0-8/12694567_1304321519594393_1835482850518315639_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12697405_1304321082927770_3947558627577724050_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12695037_1304321106261101_6878967033220968243_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfp1/t31.0-8/12710760_1304321119594433_1429390280041348654_o.jpg)

upholstered the entire boot and fitted my NOS rear cover panel
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12672008_1304321516261060_6117585468019489684_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/11336_1304321579594387_4331662706898160157_n.jpg?oh=906405243c251724d0418d3e4e7df434&oe=576AC03C)

overhauled the wheels py polishing and machining the center
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12715955_1304321182927760_2932668059891456487_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfl1/t31.0-8/12657306_1304321196261092_8170963053159146461_o.jpg)

Bridgestone RE002 tires and fitted my NOS centercaps
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12694701_1304321242927754_7132383995505930767_o.jpg)

looks awesome! yes, front is too low and front tires too wide
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/12657764_1304321332927745_8134637594767913912_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xta1/t31.0-8/12695069_1304321312927747_3004738570300584739_o.jpg)

so i fitted some narrower tires and raised the car a bit
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfa1/t31.0-8/12710908_1304321382927740_67102794734489133_o.jpg)
(https://scontent-ams2-1.xx.fbcdn.net/hphotos-xpa1/t31.0-8/12513555_1304321389594406_8227711215769743764_o.jpg)
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on February 09, 2016, 08:55:55 PM
 :c029: Truly awesome work, the detail is stunning, looks amazing!
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on February 09, 2016, 09:49:51 PM
WOW!
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on February 09, 2016, 10:54:11 PM
Coming on strong  :)
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on February 10, 2016, 03:50:37 AM
 :c029: :sign0098: :You_Rock_Emoticon:
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on August 29, 2016, 11:58:37 AM
Sorry for the long delay in updates.
i have to sit down for this with my laptop which is rare for me to do :blush:

long story short:

car doesnt run yet, few technical bits need to be sorted before i can try and start it.
the exterior is finished and i gave it a good clean and polish last weekend.
next weekend is the 20th anniversary of the Dutch RX-7 club where it will be put up for display

pics of the final result:

(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14138660_1476291192397424_5944653912125187685_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14107722_1476291199064090_1886606369003302603_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14086219_1476291195730757_2145261229538588416_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14188471_1476291239064086_7973214915733355607_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14115535_1476291242397419_3641461191753337444_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14102967_1476291245730752_2478481907530181433_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14114841_1476291282397415_8251573818711605063_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14125734_1476291295730747_1684353702113653775_o.jpg)
(https://scontent-amt2-1.xx.fbcdn.net/t31.0-8/14086302_1476291292397414_4000990374064486546_o.jpg)



hopefully not too long before i can start making some video's ;)
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on August 29, 2016, 05:51:34 PM
Excellent news that its now up on its feet, does this mean it will be running soon 8)
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on September 01, 2016, 11:22:07 AM
YES!

should only take a couple of weeks hopefully...
still need to build a new engine for it, but for now i just need to get it running
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on September 02, 2016, 09:00:12 AM
small teaser
(https://fbcdn-photos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-0/p206x206/14199151_1480428648650345_347474288461339889_n.jpg?oh=bcbda44ccdef5350e4be21d04739d69b&oe=583AD248&__gda__=1480671407_e0094a469011be4947d156871e415bc6)
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on September 02, 2016, 04:25:42 PM
Lovely photo. Gotta love a retro KnN filter.

Sent from my SM-N910F using Tapatalk

Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on May 15, 2017, 10:44:53 PM
lets blow off the dust...

car has been finished and registered in 2016, got the new engine registered aswell so it is all legal.
engine starts and runs fine, just needs some tuning.

and then life took a turn when i suddenly sold my apartment way sooner then expected.
we bought a new house, and i proposed to my girl and ofcourse she said yes! :)

last couple of months i have only been working in and around the house, havent even been to my garage in a while...

next week ill probably get the car out of storage to get it running well, so i can do a decent burnout on my wedding in July ;)
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on May 16, 2017, 09:57:52 AM
Congratulations on everything  :bravo_2: :bravo_2: :bravo_2:
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on May 17, 2017, 12:39:40 PM
Wow, that's some catch-up post  :)

 :love3: Many Congratulations

Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on May 18, 2017, 04:56:12 AM
Congratulations !!!!!  :bravo_2:
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on May 29, 2017, 10:29:45 PM
thanks :)

and now some long awaited videos

https://www.youtube.com/watch?v=FMgtteh8YsU (https://www.youtube.com/watch?v=FMgtteh8YsU)
https://www.youtube.com/watch?v=WuXt84t9lgc (https://www.youtube.com/watch?v=WuXt84t9lgc)
https://www.youtube.com/watch?v=Ia9MytaVJR8 (https://www.youtube.com/watch?v=Ia9MytaVJR8)
Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on October 16, 2017, 12:06:10 PM
finally some new pics :)

(https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/22490071_1985209624838909_7506774513698703767_n.jpg?oh=7bc4448e7a8c7420278465d81d5aa1b2&oe=5A7DAAD8)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22528911_1985209628172242_3156181110643484990_o.jpg?oh=7ce16aced76c0ca8535524fbf5f42a48&oe=5A6885C1)
(https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/22310607_1985202071506331_5573016847856828270_n.jpg?oh=0e5b4105a1f889de2a67cb844240d6a7&oe=5A70BC7F)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22459562_1985202268172978_6849305705119530297_o.jpg?oh=4928b0226d3f787119e6b6587b7bf14a&oe=5A806869)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22459447_1985202051506333_2331494246350899196_o.jpg?oh=701ef8074c40e4addc3a58bc0bdf1bf6&oe=5A84FADC)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22459273_1985202398172965_277169348358837532_o.jpg?oh=b9d9fc9588946408d49cf9242936f8e0&oe=5A7E9005)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22339233_1985202241506314_1264730554248769743_o.jpg?oh=90c52605b26a647c240697f06a5ed2f6&oe=5A830741)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22538834_1985202011506337_3455753057537864068_o.jpg?oh=07c9adf7f1d198a59a9114a6f743a137&oe=5A6ACFE1)
(https://scontent-amt2-1.xx.fbcdn.net/v/t31.0-8/22467611_1985202164839655_8534367050811038294_o.jpg?oh=55681f2f7440d4d0b360fe4221a6ff7b&oe=5A76D2D1)
Title: Re: RE-Furb.nl RX-4 project
Post by: Casey on October 16, 2017, 01:09:17 PM
Some classy pics there  :great:
Title: Re: RE-Furb.nl RX-4 project
Post by: clive on October 16, 2017, 07:23:11 PM
Excellent pictures, especially this one you will treasure for ever  :great:
Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on October 17, 2017, 11:45:55 AM
That really is amazing photo! Has to be one of the best I have ever seen! Beautifull car, amazing backround, simply stunning bride with nuce dress. EPIC photo!!!!

I'm so jealous!  And congratulations!  :)

Lähetetty minun E2303 laitteesta Tapatalkilla

Title: Re: RE-Furb.nl RX-4 project
Post by: Furb on October 17, 2017, 09:34:10 PM
That really is amazing photo! Has to be one of the best I have ever seen! Beautifull car, amazing backround, simply stunning bride with nuce dress. EPIC photo!!!!

I'm so jealous!  And congratulations!  :)

Lähetetty minun E2303 laitteesta Tapatalkilla

thanks :)

i am blessed, and she totally supports my rotary addiction  :love4:
Title: Re: RE-Furb.nl RX-4 project
Post by: boosted on October 18, 2017, 03:59:40 AM
Congratulations.!
After 10 years of marriage my wife excepts my rotary addiction....as long as i do my chores b4 heading into garage...lol.
Good luck for the future!

Sent from my SM-N910F using Tapatalk

Title: Re: RE-Furb.nl RX-4 project
Post by: re japi on October 18, 2017, 07:48:37 AM
Dammit,  typo. I meant NICE dress