Author Topic: TITAN ULTRA CERAMIC APEX SEALS!! (Rx8)  (Read 347 times)

Offline HaywardRotary

  • MRC Supporting Advertiser
  • Major Contributor
  • ****
  • Posts: 1,715
  • Karma: +54/-1
    • View Profile
    • Hayward Rotary
TITAN ULTRA CERAMIC APEX SEALS!! (Rx8)
« on: March 24, 2016, 11:25:08 AM »


We are very pleased to announce that we now are able to offer for sale our Renesis engine 2 piece TITAN ULTRA SEALS apex seals by Hayward Rotary/Precision Ceramics suitable for both naturally aspirated or forced induction.

We have spent much time testing these in our own cars making sure they really do the job.

What are the advantages over any other seal on the market?

1. Almost zero measurable wear which has multiple benefits including better sealing for much longer time and also spring pressure remains stronger behind the seal and better starting.
2 The material has a natural low friction and is therefore kind to the rotor housings and does not need excessive lubrication. In point of fact hardly any lubrication is required and mainly needed for the side seals and corner seals once these seals are installed so only the stock oil metering pump is required and no longer is there a need to premix a quantity of oil into the petrol for extra lubrication.
The use of external oil reservoirs for the oil metering pump becomes unnecessary with these seals too.
3. The nature of the seals is they are also lighter than any stock or aftermarket seal made of ferrous metal and so they do not skip at high rpm over the minor axis in the rotor housing where centripetal motion is encountered
4. Stronger than stock OEM seals. Incorporated into the material are microfibres to give greater strength. Of course detonation can destroy any seal so tuning of forced induction applications must be done carefully and these seals are good for turbo or supercharged engines provided tuning is carried out in the correct way
5. The seals have a low expansion in heat compared to ferrous material and thus are able to retain very accurate size and shape
6. For long term road use or competition racing these seals will last a very long time and even can be reused if engine does ever need to be stripped provided that the engine was built well and maintained well.
7. If rotor housings are not new these seals are also fine but as in all rebuilt rotary engine's the rotor housings must be good condition with little scoring and all chrome in tact
8. The wear on the rotor housings is very good due to the compatibility of the seals with the hard Chrome plate

The price for a full set of these seals is £ 695

Please visit our New Website to buy: www.Hayward-Rotary.com

Price will include delivery to UK. Please allow extra for overseas purchasers.

You can also phone me 07950800088
Carl
« Last Edit: March 24, 2016, 11:26:39 AM by HaywardRotary »
We warranty our rebuilt engines for Detonation, track day\'s and RWYB and NOW for 30 months which is two and half years or 30,000 miles
We also build all types of race or road engines.
We build race and track cars too.
Any kind of porting undertaken.
Single turbo conversions.
S

Offline boosted

  • MRC Full Club Member
  • Major Contributor
  • *****
  • Location: Westbury Wiltshire
  • Posts: 7,107
  • Karma: +21/-0
  • Worryless, Dream more.
    • south west
    • View Profile
Re: TITAN ULTRA CERAMIC APEX SEALS!! (Rx8)
« Reply #1 on: March 27, 2016, 05:31:08 PM »
Very interesting Carl.
What sort of run in do these need?
92 FD rx7 Twins 13.5psi. Track car
94 Westfield Se 231 rx8 street port powered. Race car
EAT SLEEP ROTOR REPEAT.