Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mazdarotaryparts

Pages: [1] 2 ... 48
1
Mazda Rotary Parts / RX-7 FC T11 3" Racing Beat Downpipe
« on: September 30, 2018, 04:00:30 PM »
This REV TII 3-inch OD stainless steel RX-7 down pipe will bolt onto the back of the stock Turbo and is intended as a bolt-on component ONLY if you are making your own Exhaust System components.

Produced using stainless steel 3-inch OD tubing and flanges, this RX-7 down pipe can also be used for as the lead component in a custom exhaust application. An oxygen sensor fitting is supplied with the downpipe.

Just one in stock and the delivered price is £220 via PayPal to sales@racingbeateurope.com along with your delivery address. 

2
We have , just one  HKS FRONT PIPE for RX-7 FD to fit all Twin Turbo FD's 1992-2002 which has been a back order from HKS for ages 

HKS Japan have not had these available for getting on for a year and we don't know if we will ever see one again.

The RX7 FD3S REW Front Down-Pipe provides an ideal first upgrade for all Twin Turbo Cars from 1992-2002 with a diameter of 70mm / 2.75"

More details of how to buy can be found on the link below.

https://www.mazdarotaryparts.com/HKS-FRONT-PIPE-FOR-RX-7-FD

3
Mazda Rotary Parts / Spark Plug Club RX8 RX7 offer
« on: September 30, 2018, 03:28:37 PM »
As you will see below we have just had a delivery of Genuine RX-8 & special RX-7 NGK Spark Plugs arrive.

These plugs are the same grade as used in the R3 RX-8 as standard and have always been the option plug for earlier RX-8, we have always referred these as hotter spark plugs to assist starting and can be used in any RX-8.
I used these in my own road car on track so I know these can be used for any purpose.

A set will consist of two NGK RE9B-T (Trailing) and two NGK RE7C-L (Leading)

Price delivered within the UK will be £75 per set and to order kindly PayPal the money to sales@racingbeateurope.com along with your delivery address please.

We can also offer for big power RX-7's a set of NGK R5671-10 or a set of NGK 5671-11 plugs for £50 a set delivered within the UK     

One time offer so once these are sold the price will not be £75 and £50 any more.

4
The above DE-Cat is Now Sold, but we can offer a new Racing Beat product with a 3" silenced de-cat pipe as seen below and can be found to buy on this link below.

This will fit any RX-7 FD from 1991-2002

https://www.racingbeateurope.com/b1992-2002--rx-7-fd3s--racing--beat-silenced-straight-through-de-catmid-pipeb-2810-p.asp

5
Rotary and General Chit-Chat / Re: TODAYS QUICK PIC
« on: September 15, 2018, 10:22:51 AM »
 :great:

6
For sale Genuine Mazda  Big Brake Disc Front & Rear Set brand new to fit 1996-2002 RX7 FD RB RS RSR & Spirit R

These discs are brand new and never been fitted from Mazda Japan a few weeks ago.

To fit  RX-7 FD3S 17" wheeled models such as RS,RSR Bathurst and other special model FD's
Part numbers  F124-33-25A front  & F124-26-25A rear

Please check your Disc sizes before buying as they are bigger than normal RX7 FD's
Front and Rear Sizes are 314mm X 32mm

List price is £1248 !

Yours through MRC for just £700 for the set saving £548 over retail

Shipping in the UK  £20  £35 for Europe and  will ship Worldwide if required.

To buy please send via PayPal to sales@

7
Mazda Rotary Parts / 1979-82 RX-7 12A Exedy Replacement Clutch Kit for sale
« on: September 15, 2018, 10:00:50 AM »
Not available from Exedy Europe any more, we have an Exedy Three Piece Clutch kit we have just imported and due to the wrong info by a customer it is now up for sale.

To fit 12A RX7 FB Clutch Assembly Series 1-2 1979- August 1982  /

Complete kit including (22 spline 215mm OD clutch disc) sprung hub, organic compound clutch disc, pressure plate, replacement throw out bearing, pilot bearing, and a clutch installation alignment tool. Number of Splines 22 / Outer Diameter 215 mm

Delivered price within the UK £190 please add £15 if out in europe.

Payment by PayPal please to sales@racingbeateurope.com


8
RX-8's / Re: Oversized side seals, good or bad?
« on: March 20, 2018, 06:49:03 PM »
We supply many company's deliberately non Europe with longer side seals so the builder can grind the ends to get the best fit for each groove.

With the grooves cleaned and lightly oiled you should just feel the side seal move to and fro under your fingers without measuring, this is how the Mazda engine builders put them together in Japan by feel  ;)

Only available out from Japan or America via Japan, most term these longer seals as "Mazdaspeed side seals"

For the ends, just replicate the side seal ends you take out.

Here is a link that may help your re-build

https://www.racingbeateurope.com/b-rx8-rotary-internal-engine-partsb-459-c.asp

Hope this helps

     

9
We have one of these sitting on the shelf taking up room, so we can price drop this down to £320 delivered within the UK rather than the £390 plus delivery plus we will throw in the big 3" Racing Beat gaskets to go with it  :)

Any one trying to go on track with a loud exhaust this year needs this  ;)

https://www.mazdarotaryparts.com/brx7-fd-de-cat-mid-pipe-3-diameter-silenced-straight-through-1991-2002b-1894-p.asp

To order kindly send the £320 via PayPal to sales@mazdarotaryparts.com

10
Mazda Rotary Parts / Black Friday weekend
« on: November 23, 2017, 10:53:14 PM »
We are offering a 10% Discount only to be applied to RACING BEAT manufactured products only.

Discount will only be good for orders placed between November 24th 0:00am to November 26th 23:59pm.

Just enter discount code BLACKFRIDAY10 into Discount box at the checkout stage of www.racingbeateurope.com

11
Rotary and General Chit-Chat / Re: Clive's 400 BHP Super GT RX-8 Race Car
« on: November 02, 2017, 08:57:28 PM »
Spoke with Jon this morning and checked a couple of things out,

Not actually driven the car but no codes showing in the ECU, also checked the battery as I had a different battery.

Still showing 12.6 volts. Balanced charged correctly with a 13.88 end voltage so it looks like no spike from this.

Still looks like it was something screwed in the ABS system from when I had the rear sensors disconnected  ???   

12
We have re launched excellent Mid-Pipe  after research showed that with Japans rules now changed and American companies now reduced market so they are not making these any more.

   Leave your RX7 FD3S Track day or Race noise woes behind with this super effective 3" Silenced De Cat Mid Pipe.

More details can be found below.

http://www.mazdarotaryparts.com/brx7-fd-de-cat-mid-pipe-3-diameter-silenced-straight-through-1991-2002b-1894-p.asp

13
Now Sold 8)

14
This Mazda RX7 FC TII or FD Rotor Housing has just arrived from Mazda Japan was wrongly ordered part number N318-10-B50C.

As Rotary people will know the Housing will also fit the REW engine and an FD housing costs £830 

Retail on this Housing is £708 and this is a price that will go up and up, so its worth buying for a rainy day or sell on at a later time for more money

As this was an ordering error we will accept £590 with £10 to deliver in the UK or £25 if delivered into Europe / for worldwide please contact

If you would like to order kindly send the money via paypal to sales@racingbeateurope.com 


15
Mazda Rotary Parts / Gen 1 Racing Beat complete exhaust system.
« on: January 01, 2017, 05:12:31 PM »
Special offer/

We have in stock a 12A Gen 1 Racing Beat complete exhaust system./ standard normal price for this system is £1045 but we can sell this as a one off delivered in the UK for just £875 / saving £170 

These exhaust systems offer excellent horsepower gains when you require a silenced exhaust system for your stock-ported engine or your standard RX-7 FB.

The actual horsepower increase depends on which year/model stock RX-7 exhaust system you are comparing to, but a 22% increase at 7000 rpm is typical.

Thanks to the combined efforts of the Power-Pulse Presilencer and the Power Pulse Main Silencer , the exhaust noise is only slightly higher than stock, with a very low, pleasant character.

Due to the weight if your out side the UK please contact us for  a shipping price.

To buy simply send the £875  via paypal to sales@mazdarotaryparts.com

 

Pages: [1] 2 ... 48