Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - spizwalt

Pages: [1]
1
2nd generation RX-7's / WANTED - RX7 FC3S REAR CALIPERS
« on: March 17, 2018, 07:25:27 PM »
Good evening Guys,

im looking for a pair of turbo 2 rear calipers. need to be fully working order.

if any one has a pair give me a message or a text on 07703392476

thanks in advance.

2
Parts for sale / WANTED - RX7 FC3S REAR CALIPERS
« on: March 17, 2018, 07:24:59 PM »
Good evening Guys,

im looking for a pair of turbo 2 rear calipers. need to be fully working order.

if any one has a pair give me a message or a text on 07703392476

thanks in advance.

3
2nd generation RX-7's / rx7 fc headlight adjustment screws
« on: October 24, 2017, 02:08:20 PM »
Good afternoon guys, im looking where i can buy or if any one has the screws for headlight adjustment.

ideally i need all 4 and in new condition but would settle for the lower screw (longer) if any one has one to get me out of a hole.

4
2nd generation RX-7's / Fitting Boost controller
« on: September 18, 2017, 07:43:36 PM »
hi guys,

so im looking to buy an electronic boost controller for my fc3s turbo 2.

current set up is it has a standard turbo on it, with an aftermarket BOV anttached inbtween the turbo and the top mount intercooler.

confused on how all the vacuum lines work with the solenoids  :L

any help will be amazing as ever :)

5
2nd generation RX-7's / RX7 turbo 2 issues
« on: September 03, 2017, 06:23:10 PM »
Good evening Guys,

So im having big issues with my turbo 2, have been for the past year.

basically the chassis loom melted it self into on big solid wire one day last year, since then ive changed the chassis loom, changed the engine loom and changed the battery loom.

so the issue i have is that the car idles perfect, will rev up perfect, gets warm, still revs fine, then you drive it, you do one full boost got to do it again and as soon as you step on the accelerator the engine dies, come off the accelerator and it comes back to life. Turn the car off and on again can do one boost and then it does the same thing again.

so far i have checked all coils, they are fine, new ht leads, new sparks, new fuel pump, changed all vacuum lines, tested alternator is charging correctly.

im at a stand still and dont know what to try next. if i cant fix it, i will be renting a container and dry storing it until i save enough for a 1j and box to drop into it. had a year from hell with this car. any help would be amazing.

6
2nd generation RX-7's / Engine wants to die when turbo kicks in.
« on: October 24, 2016, 11:09:01 PM »
Hi guys,

I have had this problem for a while now and can't get my head round it.

So the engine will start and Rev freely when just parked up and not under any load. One issue I have noticed is the boost gauge invariance then normal cluster doesn't show boost, shows vacuum and increases slightly but no where near where it should sit. It has boost their as the dump valve is dumping correctly.

So basically I can drive it down the road fine, boost once, and then as soon as I try to accelerate hard again it does until I lift off of the throttle and then it picks up again...

So confused.

Any ideas would be great!!!

Cheers

Will

7
Wanted Items / wanted: breaking rx7 fc turbo 2
« on: September 11, 2016, 04:48:45 PM »
hi guys, if any one knows of some one breaking/parting out an old rx7 fc turbo 2 s5.

please reply this this message or contact me on 07834232374

cheers

will

8
Wanted Items / Mazda rx7 fc engine bay loom
« on: July 16, 2016, 07:12:32 AM »
Hi guys.

So last weekend my engine bay loom got fried because of water! Totally gone, now either I need to replace the loom! Any one have one they are willing to sell? Car is a 1990 FC turbo 2 coupe :) it's the loom that controls all the lights and many other things not the engine or fuse box loom! In need of help and hopping some one has a spare one so I don't have to build a new one 😂

Any tips or points in the right direction would be awesome!

Cheers

Will Spirrell

07834232374

9
Wanted Items / ring and pinion gear or full diff
« on: June 09, 2016, 05:32:41 PM »
hi guys looking for fully working in good condition, replacement ring and pinion gear for my diff... mine are worn out and clunking really bad :L

or just a t2 s5 lsd complete in fully working order...

cheers

:)

10
Wanted Items / Lsd for rx7 fc turbo 2 1990
« on: February 23, 2016, 11:04:36 PM »
Hi guys, basically had my car up off the floor the other day and noticed that when I spin one wheel the other wheel spins the opposite direction, now from my knowledge this means my car isn't fitted with an lsd? which is annoying as I thought they came fitted from factory on the turbos.

Any way just wondering what price range one is and people opinions on whether to source a s4 one or an s5 or good aftermarket ones.

Please correct me if I am wrong about my differential not being lsd and it is lol

Cheers

Will

11
Parts for sale / MAZDA RX7 fc3s turbo 2 turbo gasket set
« on: February 12, 2016, 06:11:08 PM »
all original unused turbo gaskets.

brought from Atkins rotary to replace when i swap my turbo but due to the lack of luck, looks like im going to have to uprate turbo and manifold.

looking for 80 pounds shipped.

are on eBay for slightly more but if you come through here i wont have to go through ebay so can cut the cost of shipping on top.

http://www.ebay.co.uk/itm/281934119575?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

paid 120+ to get them imported in! just trying to make something back on them to be honest

many thanks

Will

12
Wanted Items / RX7 FC Turbo 2 S5 turbo
« on: February 03, 2016, 07:12:22 PM »
WANTING ASAP, cash waiting for the right one.

so looking for the s5 standard turbo that came on the turbo 2, must be in good working order, no signs of cracking (prone to crack between ports on exhaust housing!) minimal play and must not contact the housing.

need to be fully working as wanting to fit it to car asap...

ONCE AGAIN MUST BE IN GOOD CONDITIONS

Many thanks :D

Will

13
Parts for sale / RX7 FC3S turbo 2 parts
« on: January 30, 2016, 09:12:53 PM »
RX7 Standard down pipe

This was shipped into the country recently along with an engine I purchased over in Japan. As I already have a sports exhaust this part is no longer need, HENSE why it is up for sale. It is just the down pipe no the lambda sensor however might be able to come to some sort of a deal if the price is right.

£20 pounds collected or more if you wanted posted

RX7 Fan

Due to this part not being need any longer as this is my spare and I have just recently switched to an electric fan system this is up for sale. This item hasn't been tested to if it works correctly but did work perfectly in the vehicle it came from in Japan.

£10 pounds collected or slightly more to cover postage

RX7 Speedo Surround

This is for a Mazda rx7 fc. As there are two types oh these dash plastics I believe this is for an s4 model as I personally brought it beleiving it would fit my turbo 2 however it doesn't mount all the switches correctly.

£10 pounds or slightly more to cover postage

RX7 Fan Surround

Used Jdm fan shroud, recently got delivered with my Jdm engine from Japan, not need so hense for sale.

£10 pounds if collected or slightly more to cover postage.

RX7 FC air pump

Used but i believe in good working order.. came with engine from Japan but removed it and blanked it as previous engine didn't have it fitted

£30 pounds collected or slightly more to cover postage

RX7 fc turbo two air con pump

Used but i believe in working order like the air pump.

£30 pounds collected or slightly more to cover postage

RC7 fc turbo 2 jdm ecu

Came with engine i got shipped in to this country from japan but im running a aftermarket one so no use to me.

£100 collected or slightly more to cover postage.

Also HKS fuel cut defender, unused. brought for cut but using a aftermarket ecu so no need for it... it is boxed in japanese hks packaging due to me getting it shipped in when i brought my JDM engine.

£50 plus shipping cost

please feel free to contact me on here and i will give u my mobile number and can send you pictures of the parts, any interest would be good, just want them gone and to get a bit of cash back for the engine. i do have a spare box and bare engine which has low compression on rear rotor but only sold for right price...

many thanks

Will

14
Wanted Items / RX7 FC turbo 2 ENGINE WANTED
« on: September 02, 2015, 11:00:36 PM »
Hi, looking for a fully working rx7 fc turbo 2 engine, has to have good compression and no need of a rebuild. Money waiting.

Please feel free to contact me on 07834232374

Cheers

Will

Pages: [1]